domvpavlino.ru

Heating gas boiler for the house. Floor and wall heating units. Here is the general tendency of ratings and reviews of owners.

Heart autonomous heating system   - hot water boiler. From its quality, functionality and efficiency depends both the air temperature in the house, and the amount of heating costs. In order not to be mistaken in the choice of this important device, it is necessary to study every detail and function of the device. To save time on familiarizing yourself with equipment, the rating of wall-mounted gas heating boilers will help - the top position in it is always occupied by equipment that has earned the trust and recognition of other users.

Classification of gas boilers

Lightweight and compact wall gas boilers   Heating suitable for stand-alone systems in individual cottages and urban apartments. This group combines several types of equipment, fundamentally different among themselves on the principle of device and operation. Here is a list of the most important constructive features, which you should pay attention to before choosing a boiler:

  1. Number of circuits: single-circuit oriented only for heating, and two-circuit in parallel provide the functions of hot water supply.
  2. Type of combustion chamber: open or hermetic (closed).
  3. Method of exhaust gas removal: natural or forced.
  4. Energy-saving: non-volatile wall-mounted gas heating boilers operate without connection to electricity.
  5. Burner type: atmospheric or modulated with automatic control   power.

Diagram of a dual-circuit boiler with modulating burner and forced draft

Consumer ratings: independent buyers choice

The best condensing boilers

Condensing boilers are more expensive, but overpayment is more than compensated by economical gas consumption and high efficiency of heat generators, which is not less than 95-98%. It is believed that the best wall-hung gas heating boilers of this type are manufactured by the German company Viessmann.

The first place in the segment of condensation devices is a compact and elegant Viessmann Vitodens 100-W with a maximum output of 35 kW and a hot water preparation rate of 14 liters per minute.

The second position in the rating is taken by the single-circuit Ariston Clas Premium Evo System 35 FF, adapted for reduced gas pressure. The device is equipped with a primary copper heat exchanger and a secondary steel plate-type heat exchanger. The maximum power of the device is 35 kW.

On the third line is the German heat generator Bosch Condens 5000 FM, supporting the work in the cascade and with solar collectors. The device is equipped with electronic regulation of the gas-air mixture and a unique heat exchanger with patented technology of tube configuration.

Two in one: the best models of dual-circuit heat generators

Combined boilers solve at once two important tasks: heating the house and providing it hot water. These devices are in demand among owners of individual buildings and apartment tenants who do not want to depend on centralized hot water supply.

The most positive feedback in this group was earned by Vaillant turboTEC PRO VUW with forced exhaust gas and an integrated plate heater with a capacity of 11.5 liters of hot water per minute. The device is equipped with a closed combustion chamber and a modulating burner. The efficiency of the device - 93%, power - from 8 to 24 kW.

VaillantturboTECPROVUW

The second place in the ranking is occupied by the Italian Baxi Main Four 240 F, able to cook 13.7 liters of hot water per minute. Gas wall boilers for heating Baxi are equipped with a closed chamber. The instruments include traction control sensors, a thermostat against water overheating, anti-freeze and scale protection.

In third place is the German Bosch ZWA 24-2A with an efficiency of 95% and a water heating rate of 11.4 liters per minute. The device easily manages the maintenance of a house of up to 240 square meters. meters. The compact boiler is equipped with a three-stage circulation pump   and an eight-liter expansion tank.

The two-circuit gas boiler Neva Lux 7218 is not included in the top ten, but it can be noted as one of the most affordable devices. The device is equipped with a biothermal heat exchanger, modulating burner, electronic control and LCD display. The domestic boiler is aimed at heating the house up to 180 square meters. meters.

The five leading manufacturers of wall-mounted hot water boilers

A far from last role in the selection of boiler equipment is played by the manufacturer. 70% of consumers are willing to overpay for the brand, if its name is associated with product quality.

  1. Viessmann

Viessmann, the reputable German manufacturer of energy-saving equipment, takes the first place in the rating of buyers' trust. Condensation wall heating gas boilers Wisman are equipped with a simulated burner, supporting combustion with insufficient gas pressure.

  1. Protherm

In second place, Protherm is a manufacturer of high-quality and functional equipment at an affordable price. The model range of heat generators of this Slovak brand includes several lines of instruments with a combustion chamber open and closed type   and a wide range of power.

    On the third place in the rating of wall-mounted gas boilers is the leading European producer of equipment for Wolf boiler houses. In the range of the German company, models with different combustion chamber devices, with built-in heat exchangers for hot water and the possibility of connecting a boiler.

    1. Buderus

    The fourth place went to the German leader Buderus. The Logamax series of wall-mounted boilers is designed for Russian consumers and is suitable for operation in conditions of pressure drops of gas and water.

      The five most popular manufacturers from Russian users are closed by the Italian company BAXI, in the range of which single-circuit and two-circuit wall-mounted gas heating boilers, including economical condensing.

      The most attractive for the price

      Wall-mounted gas heating boilers of domestic production are recognized as the most affordable in the line of functional models. Among of Russian manufacturers   Leading EPO "Signal", in the range of which 4 modifications of two-circuit devices of the Angels series. Boilers Angels are equipped with a burner with electronic ignition and an automatic flame control system of ionization type.

      In the middle price range there are Korean wall gas boilers of Navien brand, presented by groups of high-quality two-circuit devices with separate and coaxial system   smoke removal, uninterrupted operation under conditions of low and varying pressure of gas and water.

      Wall model NAVIEN DELUXE

      Daewoo is another Korean giant that delivers on the market inexpensive atmospheric models and economical boilers   with a closed combustion chamber. For ease of operation, the instruments are supplemented with remote control panels and liquid crystal displays.

      Evaluation of a group of consumers may not always coincide with personal opinion, so we recommend that you consider not only the models that received the most votes, but also other devices of well-known manufacturers, as well as new items that did not have time to win the trust of customers. In order not to be mistaken with the choice of long-lasting equipment, it makes sense to seek help from a specialist who will take into account the needs of the family and the real possibilities of the existing heating system.

      Video: how to choose a gas boiler

      Determine which is the best gas boiler for the house and give a clear answer to such a question is impossible. Too many factors affect the choice of the optimal boiler for a particular housing. It is clear the owner's desire to buy a boiler that would work long and reliably, was beautiful, convenient and inexpensive. But we need to clearly understand that the boiler is a complex technical device that will inevitably fail someday.

      How the boiler will work, how many problems it will be with it in the process of operation, largely depends on the manufacturer. But even the extra-class heaters, regardless of the brand of gas boilers, in case of breakdown need to be repaired. Therefore, it is necessary to select the heating boiler, which is better and closer to the service. After all, the lack of service can lead to unpredictable consequences, especially in the winter. Therefore, the availability of service is one of the most important criteria for choosing a heating boiler.

      Variety of boilers for choosing the best in the world


      Before answering the question - how to choose a heating boiler for a particular home, it is not superfluous to get acquainted with the types of modern gas heating boilers. There are many tips for choosing boilers, but the main advice is the selection of the boiler in terms of capacity.   After all, its main task is to heat the house and if the power is insufficient, the boiler will work hard in severe frosts without stopping, but the temperature in the room will be low.

      Approximately the power is determined - 1 kW per 10 m2.   Usually the value of the received power is increased by 20% or even by 50% depending on the climatic zone. The main types of heating units offered by manufacturers of gas boilers for individual houses are wall and floor, single-circuit and double-circuit, chimney, with a coaxial chimney and turbocharged with separate input / output.

      Energy-independent and non-volatile gas boilers


      Energy-independent boilers, for example the domestic gas boiler Baltgas, have many advantages, but they need a stable electrical network   220 volt. Of course, many devices have been designed to provide redundancy, of which the most famous are backup generators and IBN (). Non-volatile boilers do not need electricity, but they can work in circuits with natural circulation of the coolant.

      Floor and wall heating units

      Of course, in the interior of the kitchen is best to fit a hinged gas boiler which one should be better determined only based on specific conditions. To advice on the Internet should be treated with caution, because recommending which gas dual-circuit boiler is better to buy reviews reflect only the author's point of view. It should also be taken into account that the power of wall-mounted gas boilers rarely exceeds 35 kW, so if more power is required, then it should be stopped on the floor.

      For reference. Domestic company Gefest produces gas boilers Hephaestus both hinged and floor type with a capacity of up to 40 kW. Boilers are equipped with Italian automation and in quality are not inferior to European models. The reviews found on the network for gas boilers of Hephaestus are extremely different, but FGU Rostest-Moscow conducted tests, and the boiler received the Golden Badge of Quality.

      Organization of hot water supply

      Of great importance is the availability of hot water (hot water). Therefore, the best wall-mounted gas heating boilers are those that are equipped with a built-in boiler, with the possibility of connecting an external storage tank. For example, the gas boiler Wolf - the leader in the class of compact hinged boilers. Several series of wall gas boilers are available with a capacity from 5.6 to 100 kW. Among them, for example the model Wolf CGW with a boiler of 140 liters or model Wolf CGS with built-in boiler with layer-by-layer heating of water. On such a wall gas heating boiler the price starts from 1000 euros.


      When choosing gas boiler   you need to focus on the performance of DHW, because a gas boiler with a water heater of a flow type has a low productivity and hot water may simply not be enough to fully meet the needs. If you look for the answer to the question: which dual-circuit gas boiler is better for hot water, then you need to choose one that has a non-running water heater, and an integrated boiler.

      Features of combustion chambers of heating boilers


      Gas boilers have two types of combustion chambers - an "open combustion chamber" (atmospheric) and a "closed combustion chamber" (turbo). More detailed information about combustion chambers can be studied in our article

      Open combustion chambers


      An open combustion chamber requires an influx of fresh air, it is taken from a room that must have good ventilation. For boilers of this type you need a duct chimney. The Borin gas boilers have proved themselves in the market, they are non-volatile, and the power reaches 100 kW.

      Closed combustion chambers


      In a design with a closed combustion chamber, the air for the operation of the burner is taken from the street through coaxial chimney. It represents two pipes of different diameters, one in one. Through one pipe, the combustion products are removed, and through the other there is an influx of fresh air.

      Boilers with a closed combustion chamber "turbo" are considered to be the most economical, since the fan creates the best conditions for combustion of gas and removal of combustion products outside.

      Moreover, the fan is controlled by the automatic system, which, after receiving signals from the gas analyzer, forms the optimal combustible mixture.

      Do the opinions on the Internet influence the choice of a gas boiler?


      Determine which gas boiler best buy reviews will help only if they are real, and the conditions for using the boiler are the same. And here it's not so simple. For example, in the reviews write that you should not buy a Chinese heating boiler, because it often breaks, etc. Do not follow the advice, immediately buy a high-tech boiler, for example, the company Wolf, without knowing in advance, say, whether there is in the region Customer Service.

      Any technique can refuse, and if a neighbor with a Chinese boiler service is nearby and works fine, then any breakdown is eliminated quickly and promptly. And what should the customer do if there is a breakdown in severe frosts, if there is no service and specialists for repairing a technically complex boiler? Can this happen? Without a doubt, this is a very real situation, so you need to provide the worst case scenario.

      Do I need a heating reservation?


      In order not to freeze your house you just need to make a reservation. Variants can be different - installation of electric boilers, boilers on solid or liquid fuel, etc. As an option, it is possible to propose for the reservation of heating Thermor convector instruction which specifies the rules of installation and use. The convector is installed on the wall and has a power of 2.5 kW. Equipped with a convector and reliable automatic for safety.

      Review of popular gas boilers

      A new line of heating units manufactured by JSC ZhMZ, which is sold under the trademark ZHUK, has been on sale. Particularly popular is the double-circuit gas boiler Beetle, floor, chimney. Automation, installed in boilers, Italian production. The boiler can be used for private houses up to 3 floors. Zhukovsky gas heating boiler whose price is much lower than that of European models of the same class, is used for heating up to 400 m2.

      Sime gas boiler

      In the market there were gas boilers of the famous Italian company Fonderie SIME S.p.A. Compact wall gas boilers Sime have unique technical capabilities - automatic ignition, flame detection and control of the circuit solar panels, which are connected to the DHW circuit. SIME company produces not only wall-mounted gas boilers, but also outdoor gas and solid fuel heaters. Boilers of this company have all international certificates and are high-tech heating equipment.

      Two-circuit gas boilers Arderia

      Under the license of Daewoo company, South Korean company Daesung produces high-quality heating equipment. Use the gas boiler Arderia instruction recommends for individual houses or apartments with an area of ​​up to 300 m2. The design of all models of Arderia boilers is carefully thought out, and a wide service network contributes to the popularity of Daesung gas boilers. The structure of the structure includes nodes of Japanese, Danish and German production and this circumstance is reflected in the instructions for the gas boiler Arderia.

      What is the best boiler in the world?

      Believe me, no one can answer this question clearly and unequivocally. Perhaps, it is possible to answer only so - such a boiler should be the best way to approach the region, home and to the operating conditions. In addition, the service should be decent and affordable. And most importantly, do not forget about reserving the heating system. Reservations need to be carefully thought out in advance and choose that way and then the reserve fuel that is available in the region. It can be combined with TEN, which will provide double redundancy, or an electric boiler connected in parallel with the gas unit.

      Gas boilers are widely used heating devices. Heat is released by burning natural gas (methane or propane-butane), and its amount is usually enough to heat water for everyday needs. Those people who decide to buy such a device, necessarily raise a question about which gas boiler is better. To determine the choice, you need to know the features of these devices and their types. How to look modern gas boilers, you can see in the photo.

        Advantages of gas boilers

         Today gas appliances   are the most common, they are used in many private homes.

      There are several reasons for this popularity:

      • ease of operation - after installation does not require regular maintenance;
      • economy - gas is considered one of the cheapest sources of energy;
      • possibility of work automation;
      • accessibility and variety of species - among a wide range of models, one can choose exactly the one that is suitable for both technical specifications, and at cost.
         It is unequivocal to say which gas boilers are the best, because everything depends on the situation and the needs of the owners of the house. When selecting boilers, it is necessary to pay attention to various characteristics - in this case it will be possible to choose the model that takes into account the features of housing.

        Power, which gas boiler is better

         The main characteristic of any heating devices   is power. should be based on the area of ​​the house. Usually for every 10 "squares" there is enough 1 kW of power. Thus, for the heating of a house with an area of ​​100 square meters, a boiler of 10 kW is needed.


      However, this calculation allows only approximately to calculate the required capacity of the device, since it is also necessary to take into account the heat transfer level and heat losses (the presence of a cellar, material and wall thickness, glazing, ceiling height, thermal insulation quality all affect the heating efficiency). Individual needs also matter - someone feels comfortable at 20 degrees of air, and someone prefers to stay in a warmer room.

         If there are doubts that it will be possible to make the correct calculations on your own, it is better to call specialists who will take into account all the features of the house.

        Power adjustment

         The capacity of the heating boilers can be adjusted.

      Depending on the ability to control the process, gas appliances are divided into:

      • single-stage;
      • two-stage;
      • with a smooth adjustment.
      The best gas boilers have a smooth adjustment - this allows you to change the power depending on the air temperature, so you can reduce gas consumption (more: "").


      Single-stage heat units have only one power level, they are the cheapest. Two-stage have two power levels. If possible, it is better to buy more expensive boilers with a two-stage or continuously adjustable - this will allow maintaining a comfortable environment in the room.

         In the case of using single-stage boilers, in the off-season it will be difficult to create a cozy atmosphere in the house - with the boiler turned on it can be hot, and without heating - it's cold.

        Wall and floor gas boilers - comparison

      According to the type of fastening, the following types of gas boilers can be used:
         In addition, they are installed much easier than the floor. However, it should be taken into account that their capacity is not sufficient to heat a large area, and the service life is shorter because steel or copper, rather than cast iron, is used to facilitate the construction.

         The popularity of wall-mounted appliances was achieved thanks to safety, easy operation, modern design and compact size. Also recently, wall-type gas boilers have been installed not only in private homes, but also in apartments where floor structures can not be placed (more: "").


      But if the heat unit is bought for a private house, then it is desirable to stop the choice on the floor model. Comparison of gas heating boilers clearly shows the advantages of flooring appliances. Install them in a separate room, converted to a boiler room by creating ventilation and a chimney (in more detail: ""). As a result, heating will be highly efficient and safe.

        Single-circuit and double-circuit boilers - types

         As for what kind of gas heating boilers there are, there are single-circuit and two-circuit models.
         If you need a large amount of hot water, it is better to buy a boiler with a built-in boiler, having previously figured out which gas boilers are best for a private house. If water needs a little (for example, to wash dishes and take a shower), then the best solution will be a device with a flow-through heat exchanger.

         In wall-mounted boilers, water only heats up instantaneous water heater, the built-in boiler can only be present in floor structures. But having chosen a similar model, it is necessary to obtain a permit for installation and further operation of the boiler (read: ""). It is also possible to connect a water heater to the appliance indirect heating   - in this case, problems with hot water supply can be easily solved.

      If you compare gas heating boilers, you can not unequivocally say which is better - single-circuit or two-circuit. To determine, you need to find out just enough to heat the house or it will not be superfluous yet and provide all households with hot water.

        Natural and forced circulation

         Gas boilers can have natural or forced draft. In the devices of the first type, the combustion chamber is of open type, and also an atmospheric burner is used. In these models, air intake takes place directly from the room, and combustion products come out thanks to natural draft.


      Of course, that for such of the heater   you need a special room for installation, so as not to damage the health of tenants at home.

      In boilers with forced draft, turbo or supercharged burners are used, and the combustion chamber is closed. The air is taken either from another room (this option is rare) or from the street. Combustion products are removed through small diameter air ducts with the help of a built-in fan. Of course, such devices can be installed in any premises. The best heating boilers   Gas for the apartment - with forced draft.

         It is believed that atmospheric burners are more practical, work longer and quieter, but boilers with forced draft do not burn oxygen in the room. So, it's nice to be in a heated room. As for the supercharged burners, they are not as sensitive to pressure drops.

        Condensing and convection boilers, which is the most reliable

      By the type of use of the energy received, the devices fall into two types:
      • convection;
      • condensing.
         Traditional convection boilers use only the energy of combustion of gas. Such models have several advantages, in spite of the fact that the energy received is not fully used. These include simplicity of design, ease of installation and maintenance, low cost models.

      Condensation devices also use the energy of transition of fuel from gaseous to liquid state. Such boilers are more expensive than conventional units, but they have a higher efficiency. These types of gas heating boilers are in demand equally, the choice depends only on what you plan to save - the cost of the device or fuel, which will be used in the future.

         Since condensing boilers have a higher efficiency, they are very popular in European countries. They allow you to save a lot on fuel, so it pays off quickly.

        The ignition and the features of the thermostat

         There are boilers with electric ignition and piercing. In devices with electric ignition, the start-up is automatic. Such models are volatile, so they are not recommended for homes that are often interrupted by electricity. The combustion of fuel in boilers with piezo-ignition is started by pressing the buttons (read also: "").


      Different kinds of thermostats can be used in the devices. The standard device performs only one function - it maintains the set temperature (more: ""). Programmable thermostats have a number of additional features. For example, you can set the temperature for a few days, change it at different times of the day. All these functions allow not only to save on fuel, but also to maintain comfort in the house.

         The most expensive are the devices with thermostats that count with even a special sensor even slight fluctuations in the temperature on the street and regulate the capacity of the unit, depending on this.

        Heat exchanger material of gas boiler

         In order for the purchased device to be of high quality and durable, it is necessary, when selecting, to pay attention to the material from which the heat exchanger is made.

      The most reliable gas boiler is cast iron. Despite the fact that products made of cast iron are sensitive to temperature differences, they serve not less than several tens of years. Since cast iron boilers are very heavy, they are found only in the floor version.

         Steel structures have a lower weight, besides, their cost is low. But at the same time, they are prone to corrosion, and therefore, can not last a long time. For this reason they are not the best option.

         Copper boilers are resistant to corrosion, and can also be mounted on the wall due to their light weight. Such models are considered the best - they are installed easier than cast iron, but at the same time and durable.

      Manufacturers of gas boilers

         At present, there are many manufacturers of heating equipment. Therefore, it is not surprising that the question often arises as to which firm the gas boiler is better for. The most reliable, long-lasting and high-quality instruments are German companies (Villain and Wolf), but they are quite expensive. The Italian gas boilers are not less qualitative, besides they have an affordable price.
         As for whether foreign equipment is really better than domestic products, it is not always so. But with regard to gas boilers, there is no doubt about the correctness of this statement - imported appliances are more reliable and convenient to operate.

         When choosing a gas boiler, you need to pay attention not only to its price, but also to performance and quality. It is better to spend more money for the purchase of a quality, efficient and durable boiler than to change it soon.

      When choosing the following boiler characteristics should be taken into account:

      • material of manufacture;
      • number of circuits;
      • type of thermostat and ignition method;
      • installation option (floor or wall mounted);
      • number of degrees of power;
      • type of use energy (convection or condensation).
         Most often, gas boilers are used to create an autonomous heating system in private homes, they are rare in apartments. The popularity of such equipment is due, first of all, to the low cost of fuel and the boilers themselves.

      But at the same time, one should not forget that natural gas is a dangerous type of fuel, and for installation of gas equipment it will be necessary to obtain the appropriate permit. In addition, any heating device that operates on natural gas, it is better to place it in a separate room with good ventilation and a chimney.

         In order to always be comfortable in the house, the boiler must also be equipped with a thermostat, which allows to change the degree of heating depending on the air temperature.

      Which gas boiler is better, watch the video:

      Every year heating equipment becomes more and more functional, new high-tech models appear. In the range of the market of heating technology, it's easy to get confused. Buyers are increasingly asking advice on how to choose the right boiler, which brand to give preference to. It makes sense to understand the types of equipment and look at the rating of floor gas heating boilers. This information will help you determine which equipment is suitable for your specific operating conditions.

      The Wolf brand is one of the ten best producers of gas heating boilers

      Criteria for the classification of heating boilers

      Boilers can differ in several characteristics. When choosing it is necessary to take into account everything - the need to connect to electricity, the desired location of the device, the type of burner, the type of fuel, functional features.

      Dependence on electricity

      Models for which electricity is used are called volatile. Those that do not require a connection to the network are non-volatile. Energy-independent models do not need additional control due to reliable automation, but in the event of a power outage their normal operation is disrupted.

      In non-volatile boilers there are no additional devices that require power, their design is more cumbersome, but they work fine in areas where there are problems with power supply.

      Non-volatile model - floor boiler Lemax

      Location of instruments

      There are floor and wall models. The first, as a rule, are more powerful, the latter do not occupy the floor area. Outdoor heating equipment is best placed in special rooms - furnace, and the wall can easily be installed in the kitchen.

      Wall models work on gas or electricity, and floor can be designed for various types of fuel - gas, coal, firewood, diesel fuel. Boilers of different types have significant differences in the construction, for their manufacture can be used different materials. So, heat exchangers in floor models are mostly cast-iron ones, and copper ones are usually installed in wall-mounted ones.


      So it looks like a floor heating boiler in the interior

      Types of combustion chambers

      There are models with open (with atmospheric burners) and closed (turbo) combustion chambers. The first are devices that operate according to the principle gas columns. For their uninterrupted operation, a constant supply of fresh air is required. Models with atmospheric burners can be heated, so they should not be installed in the immediate vicinity of gas meters and pieces of furniture that can deform from temperature.

      Turbocotles do not heat up, they have a different principle of operation: they are equipped with fans, which tighten the outside air and lead out to the streets combustion products. The turbo models are economical, they have a higher efficiency.


      Appearance of atmospheric burner for gas boiler

      Single- and double-circuit boilers

      Single-circuit models heat water, which enters the radiators. Two-circuit water is heated both for the heating system and for household needs. Hot water supply is provided by heating the running water thanks to the heat exchanger, and then it enters the taps. When choosing a double-circuit boiler, always pay attention to the volume of liquid that it is able to heat.

      Hot water should suffice for household needs. To do this, before purchasing equipment, you need to calculate the hot water   and choose, based on the data specified in the technical documentation for the boiler. There are also models with capacitive water heaters and with built-in water batteries. For some households, such boilers are most convenient.

      Types of fuel

      The fuel can be gas, electricity, solid or liquid fuel. Each model of the heat generator has its own advantages and disadvantages. Electric boilers   very expensive to operate, they are not recommended to be installed in houses with an area of ​​more than 100 sq.m. But they are reliable, safe, easy to install, do not require connection to the gas main and installation of the chimney.

      Models that run on gas are cheaper. They are able to heat a room of any area. Of the shortcomings - the need to connect to the gas main, which is associated with trouble when issuing permits. In addition, any gas equipment   potentially dangerous. It should only be installed by gas specialists.

      Liquid fuel boilers are a worthy alternative to gas boilers, if there is no way to connect the house to a centralized gas supply. These are powerful models, for the installation of which you do not need to issue a permit in the competent authorities. Minuses of this type of equipment consider the high cost of fuel, the need to equip the storage for it and the special room of the boiler house.

      Solid-fuel models operate on wood, coal, pellets. Thanks to such a boiler it is possible to equip a completely autonomous heating system, which will not depend on either electricity or the availability of a gas pipeline. But to store firewood, too, will need a separate room. The boiler requires supervision and regular addition of fuel.


      The most popular types of heat generators on the market

      Demand for heating equipment different types   depends on many factors. In areas where many localities are not gasified, residents prefer solid-liquid and liquid-fuel models. The climatic features of the region are also important. Where there is an opportunity to connect to the gas main, gas boilers unequivocally lead. In general, if we consider the statistical data for the country, then in the percentage ratio, the demand looks like this:

      • gas boilers - 36%;
      • liquid fuel - 30%;
      • combined, operating on several types of fuel - 21%;
      • solid fuel - 8%.

      In accordance with the demand, the supply also grows: manufacturers constantly work on improving models, producing new lines of heating equipment and competing for the favorable attitude of consumers. Some brands are considered unconditional market leaders. Further we will consider, whose production has won trust of buyers.


      The product range of one of the leaders in the market of heating equipment - the company Vaillant

      Rating of floor gas heating boilers

      At the first steps of the rating of manufacturers of the best floor and wall gas heating boilers, German firms. This is an expensive high-quality product that is able to function without fail for many years. German companies guarantee quality service maintenance, therefore they are rightfully trusted by buyers. A good reputation was also acquired by Czech and Italian manufacturers.

      At the same time, it can be noted that the demand for domestic floor gas heating boilers is growing every year. Russian companies   quite successfully compete with recognized leaders. This became possible thanks to the use of new production technologies, decent quality products and a reasonable price for heating technology. Russians and residents of post-Soviet countries increasingly pay attention to the price-quality ratio of domestic products.

      The best imported products

      If you choose only the best, then you should take a closer look at the products of such brands:

      • Wolf, Vaillant, Bosch, Baxi (Germany);
      • Dakon (Czech Republic);
      • Ferroli, Ariston, Beretta, Argo, Ar Therm (Italy);
      • Auer (France);
      • Jäspi (Finland);
      • Navien (Korea);
      • Protherm (Slovakia).

      All the heating equipment of these manufacturers has proven itself in the market. Many models are adapted for our operating conditions. Firms provide service maintenance of their products.


      Boiler Protherm with piezo-ignition and atmospheric burner

      Russian gas heating boilers

      Zhukovsky Machine Building Plant. One of the most famous manufacturers. He works since 1939, and his products are still in demand. It is relatively inexpensive, many heating boilers do not need to be connected to the mains.

      Borinsky. It is a factory where reliable heating equipment is produced. Prices are lower than for foreign analogs, the models are ideally suited for working in Russia. The manufacturer places high-quality imported automation on boilers.

      Lemax. Taganrog enterprise, which produces single-circuit and double-circuit boilers, working on solid and gaseous fuels. Many components for models - imported.

      Rostovgaspazparat. Rostov floor gas heating boilers have firmly taken their place in the market. They are equipped with heat exchangers made of cast iron and steel, high-quality automation of foreign production. Additional heat exchangers are made of copper. The design is designed to achieve complete combustion of fuel. All boilers are characterized by high efficiency.


      Rostov floor gas heating boilers

      When choosing heating technology, the main reference points should be the individual needs of each buyer. You need to decide on priorities, expectations and wishes. The variety of models is huge, so you can always find the best option   heat generator for heating the house. Pay attention to the manufacturer. The brand is not only a beautiful name, but also certain quality assurance. Help me choose floor gas boiler   it is for your home that experts from the company Ecolife can.

      Video: how to choose a gas boiler

        Loading...