Pumping unit and reagents for chemical washing of heating. Where to buy "Washing means for heating"?

Washing of boilers and heating systems - warm and comfortable always

Whichever gas or electric boiler is in your apartment or office, whatever the heating system does not heat your room, no matter how perfect and high-quality your appliances were to maintain comfort and climate, they, unfortunately, are machines, can naturally go out of order. Is it possible to avoid breakdowns and problems in the operation of hot water and heating equipment? Is it possible not to put up with the problems, but to prevent and prevent them?
   Yes! But for this it is necessary to find professionals who will prompt you what to do and recommend how to do it so that your boilers, speakers, heating systems do not fail.
   We are professionals in the market of hot water boilers and heat engineering, we have many years of experience in installing boilers and their maintenance, so we know what to recommend to you. We have all necessary equipment   for service of boilers, and therefore we know how to help you. We know that you need a systematic boiler flushing   and flushing of heatingso that your equipment is always ready for use. Let's take a closer look at when and why flushing boilers and heating systems.

Boiler washing during installation

When installing the boiler it is important to debug the supply of gas, electricity, water, so as not to have problems with the operation of the equipment, it is necessary to debug the automation. All this is known and understood by every buyer. However, not many people know that when installing a gas or electric column or boiler it is necessary to flush the boiler to remove factory dust, soot, harmful compounds that may be unsafe for human health. Here the washing of the boiler is carried out in several stages using alkali and re-washing. This job is better to entrust to a specialist who knows the rules and standards of technology, and accordingly, will be able to prepare the equipment for operation, and you will be sure that your equipment will last a long time.

Washing of heating systems before the start of the heating season

TO heating season need special preparation. If during the summer you did not operate your equipment, then in hollow metal pipes   the corrosion process may start, which is why it is necessary to carry out the washing of the heating, and also the washing of boilers that have not been operated for a certain period. We will prepare your heating system for the new season, which is included in the service maintenance   boilers and heating systems.

Flushing of heating systems as a measure of prevention and removal of scale, rust, calcareous deposits
   The water that is fed into the system has a lot of lime impurities, and often sand, which is why periodic washing of boilers, boilers, and columns is required. Professionals will perform complex flushing of systems, pipes, coils, tanks, which will ensure the uninterrupted operation of the equipment.

Kinds of washing of boilers and heating
   We suggest that you flush the boiler and heating in such ways:
   - chemical. In this case, the impact on the blockages is primarily carried out by chemicals, and then water is flushed. The method is suitable for all boilers and heating systems.
   - hydrodynamic. Boiler washing   is carried out with the help of special equipment that creates a flow of water under pressure. This method   effective, but more expensive, because a special technique is used.

Is it possible to wash the heating boilers independently?
   In order to make the boiler flushing and flushing the heating yourself, you need to have the skills and experience, because you want to extend the operational life of your heating equipment. You can periodically flush chemicals yourself, which you can buy from us. However, even in this case, you will need to diagnose the boiler at least once a year. We will help your heating engineer withstand any tests.

Cleaning liquid for heating, cleaning the heat exchanger

	Recommendations for the use of liquid "S.N.O." for washing heat exchangers for heating systems, cooling systems and refrigerating columns containing light alloys, aluminum (Al) and stainless steel. "S.N.O." is a liquid for washing heat exchangers containing light alloys, aluminum (Al) and stainless steel.	2640 in stock

Effective means of flushing the heating system and cleaning means in a multi-apartment, private residential building, any other building produces and sells Konferum digging. Flushing and descaling from scale internal system heating, boilers must be carried out regularly. Chemical compositions, which are presented in our catalog, are ideal for this. They copes with equal success both with scum and with physical contamination of the boiler and pipes. When water is taken from a river or other untreated sources, for example, silt may enter the system. Our cleaning and flushing systems for heating and heat exchangers will help you cope with any problem. A tool for washing, cleaning, cleaning the internal heating system, boilers to buy in Moscow, St. Petersburg, another city in Russia you can at the lowest price of the manufacturer in our office.

Buy washing means for heating systems and boilers

On the site you can easily find addresses and phone numbers of shops ,   in which it is convenient to buy means of washing, cleaning the heating system and boilers throughout the country and near abroad. In addition to Moscow and St. Petersburg, the sale of washings through the branches or representative offices of the Conference is organized in Krasnoyarsk, Yekaterinburg, Rostov-on-Don, Nizhny Novgorod, Irkutsk, Kemerovo, Kazan, Barnaul, Kurgan, Kaluga, Chelyabinsk, Ufa, Tyumen, Yoshkar -Ole, Abakan, Cheboksary, Novocheboksarsk, Sayanogorsk, in Alma-Ata, Minsk, Chisinau. If you decide to clean the heating system wholesale, then you will win doubly - you will be offered special selling prices. To clarify the terms of cooperation and the price you can, in any convenient way. If you do not have our representation in your city, you can make a retail purchase on the site. Contacts for the connection are the same. In case of difficulty in choosing the right composition, we recommend that you consult our online consultant and you will immediately receive a qualified answer to your question.

A means of cleaning the heating system of a private and multi-apartment building

How does flushing and cleaning of heating systems and heat exchangers occur? At mechanical, the entire system is disassembled, the elements are washed and cleaned separately in cold water or a specially prepared composition using the washing means of the heating system. Chemical cleaning of heating systems avoids complete disassembly and makes the entire cleaning process less time-consuming. Here, the mechanical effect is replaced by the chemical reaction of the means for washing the boilers and the heating system that Conferium offers you in the assortment. Some of them can be called universal, others are designed to solve specific problems - so there is something to choose from. Cleaning means for private and apartment building   dissolve mineral and organic substances, remove carbonate layers. The duration of the chemical reaction ranges from 3 to 14 hours, the concentration of the washing means of the heating system, too. Carefully study the instructions to the composition to conduct the entire process of cleaning the system competently and with maximum effect.

Effective means of flushing the heating system and cleaning means in a multi-apartment, private residential building, any other building produces and sells Konferum digging. Rinsing and cleaning from the scum of the internal heating system, boilers must be carried out regularly. Chemical compositions, which are presented in our catalog, are ideal for this. They copes with equal success both with scum and with physical contamination of the boiler and pipes. When water is taken from a river or other untreated sources, for example, silt may enter the system. Our cleaning compositions and ...

When using the heating system, sooner or later a situation arises when the pipes form scales, various kinds of deposits on the inner surface, the diameter narrows due to jamming of pieces of debris or scale. As a rule, this situation occurs in systems where water is used as a coolant. Basically, for heating houses, a not very purified coolant is used - it can contain pebbles, pieces of rust, scale. In addition, water contains a variety of chemical formations - they under the influence of high temperatures settle on the inner walls of the pipes.

In such cases, it is necessary to flush the heating system. As practice shows, scale 2 mm thick reduces the efficiency of the heating system by 48%.

Washing is a standard service procedure, which must be periodically performed - otherwise you can not avoid a significant reduction in the efficiency of the heating system, increase energy costs and break down sections of the highway.

If in apartment house   such work is performed by employees of special services, then in a private house owners have to take care of such things themselves.

Flushing the heating system during installation

When installing the heating system of a private house, it is necessary to check all elements of the main line for lack of small building debris. After installation, it is necessary to rinse with water - no reagents we do not use:

• Let's start a strong pressure cold water   and leave for 2 hours - so we remove small foreign particles from the circuit.
• Let's start the maximum head hot water   - It washes out various oil formations.

Then a similar procedure should be performed after 3 months and regularly repeated annually.

After stopping the heating main for the summer period, it is recommended not to drain the water - otherwise all foreign formations inside the circuit will harden and they will not be able to be removed. In addition, the sealed joints can dry out and begin to leak after the heating system is restarted.

Indication of scale inside the heating circuit

We can determine that the scales formed in the pipes on the following grounds:

• A significant decrease in the efficiency of heating the premises.
• Extraneous noise when the equipment is operating.
• Radiators are heated either only from above, or only from below.
• Significant increase in the consumption of energy resources - electricity, gas, solid fuel.

All of the above symptoms indicate that it is time to flush the line. For its carrying out it is possible to use the equipment for washing of heating systems, and also special reagents - a means for dissolution and destruction of scum and rust.

This method requires special installation. The device fills the pipeline with a mixture of compressed air and water. This creates a small ripple, which removes rust from the inner surface of the contour, scale and calcareous formations. This installation very effectively clears the main line from all extraneous formations, which increases the efficiency of heating the house and reduces the cost of energy.

Biological reagents - effective remedy   for circuit washing

It is possible to perform such washing without stopping the operation of the main line-biological reagents are added to the heat-carrying liquid, which, being dissolved in it, circulate along the contour and wash away the rust and scale.

This tool is advantageous because it does not need a special apparatus, we do not stop the system, in addition it is a very highly ecological method that does not destroy the internal surface of the pipes and does not pollute the environment.

Chemical reagents for flushing the heating main

Chemical flushing is also a very effective means of cleaning the contour from extraneous formations. Chemical flushing is a liquid containing reagents in the form of various acids.   It is used in complex contours, where there are many hard-to-reach places. A liquid of this kind copes very well with all kinds of contaminants, but one should carefully read its composition before use. It must be compatible with the material from which the contour is made - otherwise its use can cause the pipes to collapse.

Method of pneumatic shock

Another method for which a special apparatus is required is the method of pneumatic shock. It consists in the fact that the hydraulic installation is connected to the main line and creates pneumatic hydrowaves. The main impact force is transmitted to the heat carrier - about 98%, the remaining 2% - to the walls of the system.   Under the influence of these waves, all the scale and rust of the inner walls of the pipes fall off. This method is quite safe and is applicable in any type of contours, even very old ones.

Conclusion

Flushing the heating main in a private house is an obligatory procedure related to the maintenance. It must be periodically performed in order to avoid reducing the efficiency of the system, increasing the consumption of energy resources, as well as the destruction of the highway due to critical contamination with rust and scale.

Owners of private houses should independently control the pollution degree of the circuit and take care of the timely performance of all maintenance work.

1.
2.
3.

The heating system periodically needs maintenance and cleaning, because over time, scale deposits are deposited in the pipes and a corrosive layer is formed. Even if the thickness of such deposits is only 1 millimeter, the efficiency of the heating system is reduced by 10-15%. The more descaled, the worse the room is heated.

This is due to the fact that it has a porous structure and good thermal insulation properties, which prevents the radiator from giving heat to the air. As a result, to maintain a comfortable temperature in the room requires more thermal energy, and this increases the cost of heating. To remove scale, special means are used to flush the heating system. In what form they are sold, you can see the photo.

  Choice of washing liquid for the system

   Before buying the money, it will not be superfluous to consult a specialist. The way to deal with sediments depends on their type.

When choosing, you should pay attention to the following factors:

1. Basis of the facility. The washing liquid can be alkaline or acidic. Acidic act faster, to get the effect of alkaline compounds will have to wait a while, but they are more safe for pipes (read: ""). Wash means are not allowed for all metals and coatings.
2. Presence of anticorrosive effect. If it is not available, it is recommended to additionally purchase a product that prevents corrosion in the system (see also: "").

  Chemical flushing

   This way of getting rid of scale and rust in heating systems is the most effective. Only with the help of chemicals   It is possible to completely remove sediments in radiators and pipes. But when working with them you need to remember that they are toxic, therefore it is recommended to use a respirator. If it is not, then the room should be well ventilated.

   Do not use acid-base or alkali-based compounds for washing aluminum radiators. For this metal there are special, safer means. With tubes and radiators from other metals, you also need to be careful. To choose the suitable means for flushing the heating system, it is better to consult a specialist.

   If it is necessary to flush the entire heating system, you will need to use a booster pump with a tank of 10 liters that can be connected to the pipes. If you only need to wash the boiler, then you can do without it.

Flushing the heating system is quite simple:

• in the booster pour liquid for cleaning and if necessary dilute with water;
• instead of hoses intended for supply and discharge of water, connect the pump (as it is done, indicated in the instruction);
• include the device for washing and wait for the time specified in the instructions for the washing liquid for the heating system;
• after completion of the process, the product is drained, and the pipes and radiators are washed clean water;
• connect the heating system - it is ready for operation.

   During cleaning, it is recommended to add to the main product reagents for flushing the heating system to prevent corrosion. They seem to envelop the surface of the metal, not allowing it to react with alkali or acid. After cleaning, you must immediately adjust the operation of the heating system to return to its normal operation.

   The chemical method will cost ten times cheaper than replacing all labor and heating radiators, even if it is produced by professionals. If once a year to clean the pipes, then the heating system will be able to work without major repairs for about 20 years. In addition, prevention can help reduce heat costs by 30-40%.

  Pneumohydropulse and hydrodynamic flushing

   In this case, heating system   a compressor that drives the liquid under it high pressure. The advantage of such cleaning methods is safety, since ordinary water is used for this, and damage to pipes and radiators is excluded. But at the same time, the absence of a special washing liquid causes the scaling and rust to remain on the joints and folds of the pipes.

   Currently, the most effective method of cleaning is pneumohydropulse, which uses special powders and liquids to serve heating structures and protect metal surfaces.

  - an important event that helps to increase its service life and the efficiency of space heating. But in order not to spoil the pipes and radiators, the rinse aid should be selected together with a specialist.

See also the video on washing the heating system: