Review: how to clean the hood and grate from grease in the kitchen

The cooker hood will not create problems if it is periodically cleaned. Removing fresh dirt is much easier than working with old ones. In addition to the intimidating appearance, the effectiveness of air purification in the kitchen is reduced. With old pollution, the hood may stop working altogether. You need to take care of any household appliances, and not only outside. We will tell you the most effective methods on how to clean the hood, grate and filter.

Preparatory stage. Steam cleaning

Before proceeding with the cleaning procedure, it is necessary to carefully study the product passport and determine collapsible areas. The standard algorithm of actions is the following.

1. Disconnect the hood from the power supply.
2. Remove grease grate. It can be mounted on latches, bolts, in some models it is necessary to dismantle the decorative strip.
3. Remove charcoal filter if equipped.
4. Disconnect the exhaust pipe that goes from the hood to the ventilation shaft.
5. If there is an air filter, it must also be removed.
6. Assess the degree of contamination and choose the best way to clean the system. To remove especially old contaminants, aggressive methods of exposure will be needed.

Cleaning the hood with a steam generator is the safest and most environmentally friendly method that does not require the use of chemicals. It can be used to clean the inside and outside of the hood. In addition, it will also be useful for cleaning any surfaces in the apartment. The main advantage is steam, the temperature of which reaches 150 °. It not only effectively removes fat deposits in 5 minutes, but also disinfects surfaces.

Steam cleaning

Automatic cleansing and folk remedies

You can clean the mesh in the dishwasher. This method is only suitable for elements made of stainless steel or enameled. Put all the parts in the machine, add detergent and turn on the program with a minimum temperature. During this time, you can wipe the engine, outer casing and internal parts with a detergent composition.

You can also resort to folk methods. Time-tested home recipes will be invaluable help in removing body fat.

Bleach

To clean a dirty hood grate, you can use ordinary bleach. It is also used for washing and cleaning the body. For processing small parts, use an old toothbrush. All surfaces must be carefully treated and left for 15 minutes. Then rinse well and wipe dry.

Bleach cleaning

Lemon and citric acid

Citrus acid helps in many everyday problems. To remove fat deposits, cut the lemon into thick circles and rub all surfaces. After a quarter of an hour, it will become much easier to remove dirt. Citric acid has a similar effect, 40 grams of which must be diluted in a liter of heated water, treated surfaces and left for 30 minutes.

Cleansing with lemon

mustard powder

Grandma's way will help this time too. The application technique is as follows:

• wet the grate with water;
• dilute 3.5 tbsp. l. powder with 2 tsp. shampoo, add 100 grams of water and vinegar;
• gruel to process the surfaces of the grate;
• wrap the grate with a towel dipped in hot water;
• after 30 minutes, clean the mesh with a brush. Rinse everything thoroughly.

The effectiveness of the powder is enhanced only in warm water. In the cold, mustard powder practically does not work.

mustard powder

Baking soda and vinegar in the fight against pollution

Before cleaning a contaminated stainless steel hood with a 70% acetic acid solution, rubber gloves should be worn, as this method cannot be called safe. You will need an old clean rag, which must be moistened with acetic acid, wipe all surfaces with it and leave for 7-10 minutes. With heavy contamination, extend the processing time to a quarter of an hour.

To combat old contamination, undiluted acetic acid should be used. If fresh deposits are being cleaned, the solution can be diluted with water in a ratio of 1 to 2.

Baking soda and vinegar

Baking soda can be used to remove plaque. The powder is poured onto the surface and wiped with a sponge until the contaminants are completely removed. After that, the surface must be washed and wiped with a dry cloth. It is not advisable to wipe glossy surfaces with soda, as scratches may appear.

Baking soda is an assistant for any cleaning at home, in the case of a hood, you can use soda with vinegar. Moisten the surface and pour soda in a thin layer, pour vinegar on top. The result of the reaction will be fast. It is necessary to give the composition to foam, then leave for 3 hours. Then rinse with water.

The use of laundry soap and ammonia

To remove old dirt, you can use 72% laundry soap and a brush with metal or plastic bristles.

The use of laundry soap and ammonia

Method 1

To do this, you need to grate 0.5 pieces of soap, dissolve it in 2.5 liters of water. Soak the grate in the solution for a quarter of an hour, then thoroughly brush all contaminated places with a brush. Then rinse with running warm water and dry.

Method 2

Digestion is one of the most effective, albeit time-consuming methods. To do this, you need a large container to fit the filter in it. You can take a metal bucket or basin. If there is no large capacity container at hand, boiling can be carried out in 2 stages: first clean one side, then repeat everything with the other side.

1. Dissolve carefully 250 grams of soda in 5 liters of boiling water, grind a bar of laundry soap and 40 grams of salt. There are no clear proportions, the more concentrated the solution is, the more effective the cleaning will be.
2. Dip the grate in boiling water, leave to simmer on low heat for about 15 minutes. The water will gradually turn brown. After that, immediately remove the container from the fire. If the fat has not completely dissolved, you can repeat the cleaning procedure, but in the updated liquid.
3. After boiling, remove the residue with a stiff bristle brush.

You can grate the grate with laundry soap and put on a baking sheet. First add a little water, place in a heated oven for 30 minutes. Soap will break down all deposits perfectly. After that, rinse well.

Method 3

If the previous method did not help, you can continue to boil the grate, but with ammonia.

1. Dissolve 100 grams of ammonia in 5 liters of water.
2. Bring the composition to a boil.
3. Lower the grate into it and leave it on low heat for about an hour.

All old dirt will go away, it remains only to remove the remnants with a hard sponge or brush, rinse the grate and dry.

Before using ammonia to clean the hood from fat, the kitchen shouldensure good ventilation.

Grid cleaning

Household chemicals

The distribution network offers a wide range of chemicals for the effective removal of all kinds of contaminants. This greatly simplifies the task and speeds up the cleaning process. Before use, carefully read the instructions so as not to damage the grate. Also, all work must be carried out in rubber gloves.

Mesh cleaning

Household chemicals to remove body fat

The action of household chemicals is similar to each other. Beforehand, the product should be applied to the areas to be cleaned and left for some time to soften the deposits according to the manufacturer's instructions. Then remove with a stiff brush or sponge and detergents, rinse with running water. If necessary, repeat the procedure until the fat is completely removed.

Pipe cleaners

If household chemicals for cleaning the hood from old fat did not help, you can resort to more aggressive methods. Any means for cleaning sewer pipes will do. Such radical compositions are used no more than twice during the entire operation of the hood. You also need to follow the instructions and the processing time so that the structure does not deform.

When processing with a liquid composition, it is necessary to fill the entire surface of the grate with it. This can be done on a baking sheet or in a large container. The reaction will be instant. Remove the grate after 2-3 minutes and rinse thoroughly.

For processing with a granular composition, it is necessary to fill all the contaminants with a powder and pour boiling water over it. After 5 minutes, brush with a stiff bristled brush using detergents. It is recommended to pour the used composition of cleaning agents into the toilet bowl.

Household chemicals can be alkaline or acid based. Alkaline preparations are more effective in the fight against severe pollution.

Cleaning the outer case. How often should you clean

The time the grate is soaking in the solution should be used to clean the outer casing. Here, too, difficulties can arise. Dust accumulates on fatty deposits and a rather hard coating forms, which cannot be cleaned with hard rosaries and abrasive agents in order to avoid the appearance of microcracks.

Chassis cleaning

The cleaning procedure is as follows:

• pour any detergent onto a soft foam rubber sponge and spread over the surface;
• you can use any spray to clean kitchen surfaces;
• after a quarter of an hour, wipe everything with a damp cloth. If necessary, repeat the procedure 2-3 times. Then wipe everything dry.

Cleansing activities

The degree of contamination can be determined by the appearance of the grate. If red spots appear on it, it's time to carry out a comprehensive cleaning of the hood.