What should be the height from the stove to the hood: basic rules for choosing a distance

When it comes to mounting a range hood, it's not just about hanging and connecting the unit correctly.

Before that, you need to choose the right distance between the hood and the stove. The correctness of the calculation depends on how efficiently the device will work.

Consider below the basic rules for solving this issue.

Briefly about standards and rules: for those who do not want to read a lot of details

To begin, let's briefly summarize the main rules and standards - if someoneneed to quickly find out at what height the device is installed, or if notgo into details.

Distance standards pendants are:

Of necessity ( if the user is tall), the height can be slightly increased. How much increase is allowed - is written in the instructions for each my product . Usually this range is 5-10 centimeters.

Why is it important to choose the right distance from the stove to the hood?

A certain installation height is chosen for a reason: if it is chosen correctly, then the hood will work efficiently. And vice versa: if the mounting distance is not chosen correctly, then the device will work less efficiently, and it will not be so convenient to use the stove.

If you mount the device too low:

it will be inconvenient for a person to use the stove (especially if he is tall);

there is a risk of fire: the soot and dust deposited on the filters can ignite from open fire (the probability of this is very low, but still available);

removing the filters for cleaning will be less convenient.

If the hood is placed too high, then it will be more difficult for it to retractsteam and smell from the stove. Because of this, the device will need to be turned on at a higher speed, which will lead to more noise, more electricity consumption and a greater likelihood of breakdown.

At honor: there are no strict standards according to GOST for apartment hoods. All recommended sizes are calculated by the manufacturer: for the most comfortable, safe and efficient operation of the equipment.

How to measure the distance correctly?

Do you know what distance you need to measure between?

It is necessary to measure:

• for an inclined model: from the lowest part to the burners (hob);
• in the "normal" (built-in, domed, T-shaped, flat): from the filter to the burners (hob).

Without fail, measure not only the distance from the hood to the stove - you also need to figure out how convenient it will be for you to use the device. To do this, stand in front of the countertop and imagine where the hood will be placed. At the same time, consider not only the height, but also the depth of the case - how many centimeters it will protrude from the wall. Estimate: will the body interfere with the head while cooking?

Hood height above gas stove: standard

• 55-65 cm - for inclined models;
• 75-85 cm - for other products (embedded, domed, flat, T-shaped).

The height of the hood above the electric stove (induction or classical): standard

The standard height at which exhaust devices are installed above the electric stove (it doesn’t matter if it’s induction or classic):

• 35-45 cm - inclined models can be placed (measured from the bottom);
• 65-75 cm - to accommodate other models.

We noticed that it is possible to make the distance for electric stoves smaller than for gas stoves.

Hoods can be hung lower above an electric stove than above a gas one - because they are less flammable (there is no open flame).

Installation height of inclined models

Inclined models are a convenient option for:

users with high growth: since this way the body will not interfere with the head when cooking;

• small kitchens: the sloping body visually takes up less space, without protruding far from the wall.

In this case, it is necessary to measure the distance from the lower edge of the body to the burners of the food being prepared.

We repeat once again - the inclined model is hung at this height:

• 35-45 cm if an electric stove is used;
• 55-65 cm if a gas stove is installed.

Features of installing models of other types (built-in, dome, island)

In addition to inclined, there are models of the following types:

1. Embedded (embedded). They are installed in a kitchen cabinet, have a small depth, have a retractable part.
2. T-shaped and domed. They differ visually. Can be covered by a kitchen cabinet.
3. Flat. Can be mounted under the kitchen cabinet, saving space to the maximum. The weakest category.
4. Island. Such a device is attached to the ceiling - if the stove is not next to the wall, but in the distance.

The height of their location must comply with the rules described above, regardless of the type.

What else to look for when choosing a place for installation?

In order not to make a mistake when choosing a place for installation, in addition to height, pay attention to the following parameters:

1. (which is already there, or a place where it can be made).
2. Distance from the ventilation shaft.
3. Power.
4. Depth and width. For maximum efficiency, the hood housing must necessarily cover the entire “working” surface of the stove.

Do-it-yourself distance selection and installation steps (video)