Plastic tiles in the kitchen how to fix. Kitchen apron made of PVC panels - material features. We choose plastic panels for the kitchen apron. Use of PVC panels
Kitchen cutting table, sink, stove are usually located along one wall. When cooking, splashes fly from them, greasy streaks form on the walls. That is why the wall adjacent to the headset must be reliably protected so that it does not lose its beautiful appearance. Wanting to inexpensively, effectively finish the wall, you need to pay attention to the plastic apron. There are a number of ways to glue an apron in a plastic kitchen, it will be an excellent alternative to tiles, ceramic tiles.
Varieties of kitchen aprons
Under the kitchen apron is understood the distance between the surface of the table and the lower edge of the wall cabinets. Beautiful design of the apron gives a finished look to the entire kitchen. This cover has two functions:
- protective - protects the wall from negative impacts, easy to clean, resistant to household chemicals, high temperatures, humidity;
- aesthetic - decorates the kitchen, serves as an original accent in the interior, "collects" the style together.
The material for making the apron can be different - polycarbonate, ABS, PVC panels. Plastic lining is almost never used now, it has become obsolete, and chipboard, MDF are not suitable for this purpose.
In terms of design and appearance, the material is also diverse. Some prefer plain panels, others get an apron with mosaic imitation. Aprons with drawings, photos, artistic texture, wood or natural stone look unusual. There is material of original color, under the painted glass, a stained-glass window, even a brick. As for models with drawings, they are applied to the plastic itself by embossing or printed on a film covering the panels from above.
PVC panels
Most often on sale you can find just such a coating. The length of the panels is 2.6-2.7 meters, there are products with a length of 3 meters. The thickness is 0.5-1 cm. PVC is the most inexpensive material for an apron, but it has many more disadvantages.
It is important to know! Plastic based on polyvinyl chloride very quickly begins to fade, scratch, so it will not look beautiful on the wall for long.
It is easy to wash the material only if there are fresh stains. It will be problematic to remove stubborn fat, because even ordinary soda will leave unsightly streaks and defects on it. It is forbidden to use aggressive chemicals on PVC for the same reason. Installation of PVC is simple, but leaving seams with gaps will lead to the growth of fungus and bacteria. Other problems that may arise when buying panels:
- difficult dismantling (PVC has to be glued to liquid nails, epoxy-based adhesives, and it is difficult to tear them off);
- poor reaction to high temperatures - at the PVC plate it can melt;
- low environmental friendliness - when heated, this type of plastic releases harmful substances, especially at low quality.
ABS
This plastic is better suited for an apron, although it costs almost like a mosaic, tile flooring. ABS is shock-resistant, it is made on the basis of acrylonitrile, styrene. It is resistant to cleaning with abrasives, chemicals, light. In fact, you can not clean the material with solvents and acetone, other products are allowed for use.
ABS plastic is harmless to humans, diverse in patterns, textures. Minus - burnout in the light, yellowing over time or initially yellowish tone.
Polycarbonate
Of all the types of plastic aprons, polycarbonate is the most durable and reliable. The carbonate glass material is transparent, it is almost impossible to break, pits, scratches from moderate impact are not formed. The apron will not fade, turn yellow, it is fire resistant. The disadvantages include the higher cost of the product.
Advantages and disadvantages of plastic panels
Compared to tiles and other materials, plastic (with the exception of PVC) has a number of advantages. Here are the main ones:
- moderate price;
- moisture resistance;
- the ability to withstand elevated temperatures, the negative impact of household chemicals, food acids, fats;
- resistance to mold growth (if the installation was carried out correctly);
- light weight of the material;
- tight fit to the wall;
- the possibility of installation with your own hands;
- the ability to adjust the height, length.
Due to the low price and cost of work compared to tiles, which should be fixed only with experience, a plastic apron can be changed more often - this will not cause a "hole" in the budget. When replacing an apron, you don’t even need to move furniture.
There are also downsides to the material. You should not glue it next to a gas stove - any type of plastic deforms over time, even the most fire-resistant, because exposure to heat will be frequent and prolonged. Plastic should not be rubbed with hard brushes.
Polycarbonate will not withstand intensive processing either - small scratches will still appear. Only some types of pattern will smooth out this drawback: if the surface is decorated with relief images, made under an aged stone or brick, small flaws will be invisible.
Rules for installing a PVC apron
You can install a plastic apron in different ways - stick it on the wall, fix it with screws, screw it onto the crate. Thin sheets are most often attached with glue. You can even make a frame, and the finished apron will be removable. Before starting work, it is necessary to prepare the surface - level, prime. If necessary, cables can be passed under the panels by making a recess in the wall, after plastering.
When gluing thick plastic, you don’t even have to remove the old coating, it is allowed to immediately stick new material on it. If the repair in the kitchen is already completely finished, it is better to fasten the plastic with self-tapping screws - damage to the walls will be minimal.
Materials, tools
Depending on which option is selected, different accessories for mounting the apron may be required:
- metal profiles;
- wooden bars;
- self-tapping screws;
- screwdriver;
- dowels for crates;
- building level;
- glue;
- ruler, tape measure;
- pencil;
- hammer.
Mounting methods
Fastening is carried out depending on the wishes of the user, the degree of evenness of the wall, the presence or absence of the old coating.
On rails - special profiles
It is better to use this method if you plan to regularly change plastic panels in the future. It will be possible to remove the material without damaging the base. You need to direct the position of the plastic with special iron rails, which are fixed in a horizontal position on the wall with self-tapping screws. Plastic is laid on guides, each pair of which serves as "rails". After you can push the old apron, push the new one.
self-tapping screws
Self-tapping is a non-false option that is ideal for finished walls or installing transparent painted panels. You can also glue them, but the glue is able to shine through, distort the pattern. The work is carried out according to the following scheme:
- Make holes in the wall with a drill, into which screws and roof rails are then inserted.
- Cut out the desired pieces of plastic.
- Arrange the beacons according to the level, they will serve as a support for the panels.
- Attach the panels with brackets or screws.
- Cover the caps of the screws with special plugs, caps.
- If necessary, hide the wiring in the gap between the panels and the wall, because there will be quite a large space.
On the crate
A spacious room will not suffer too much if the wall shrinks a little when using the crate. Usually this method is used when it is necessary to apply a large apron, and the wall is too uneven. Installing the crate will correct this shortcoming.
The crate is interconnected metal, wooden slats attached to the wall around the perimeter of the apron. Usually, at first, a crate is made strictly according to the size of the apron, then horizontal and vertical strips are fixed inside with self-tapping screws to strengthen and strengthen the structure. They are placed 50 cm or less apart. Under the crate, you can place wiring, controllers, sockets. The apron is attached to the crate with brackets.
On glue
Attaching the panels with glue is very simple. After gluing, the plastic will become stiffer, will not be subject to deformation.
Note! Wall differences should not exceed 1 cm, otherwise it will not work to glue the apron securely.
The order of work is as follows:
- Make markings on the walls, using a level, accurately mark the upper and lower borders of the apron.
- Cut the material according to the markup so that the plastic goes a little behind the furniture.
- Take dry building glue or liquid nails (preferably white), apply to the material.
- Press the plastic against the wall.
- Glue the edges more securely, but it is better to fix them with small staples, self-tapping screws.
- Cover the cuts with skirting boards, mask with planks, if necessary.
Panel preparation - layout, cutting
To install the panels correctly, it is important to determine their direction in advance. If the panels are wide, they are placed horizontally so that there are few joints. Narrow sheets are cut and attached with vertical seams. You can cut the material with ordinary scissors, a sharp knife, a hacksaw with fine teeth. The thinnest sections are achieved with a nichrome thread. They can also be made by professionals practicing laser cutting.
Final finishing
The gaps between the apron panels and the countertop must be covered with a border. It will not allow water to penetrate into the gap, protect it from dirt, food debris, grease, and hide defects. Also, the border has a decorative function.
You need to choose a plastic product that is optimally suited to the panels, and it is not difficult to mount it. The shape of the border is flat, triangular, curly, rectangular. He is put on glue, liquid nails.
If there is a plank on the countertop, there is no need for such a border. We must also remember about the corner pads - they are also selected together with the apron panels or with the table top.
Apron decoration
The color of the apron is chosen in accordance with the design, tone of the furniture in the kitchen. In a small room, you should not use dark shades that visually reduce the room even more. It is better to buy a light-colored apron. Completely transparent plastic without a pattern can be decorated independently, for which different techniques are used.
decorative painting
It is quite possible to paint the material with the help of paint. To do this, they buy acrylic dyes in a needlework store, construction markets, which are easy to apply and mix well with each other. The picture can be found on the Internet, the main thing is that it fits well with the overall design of the kitchen. It is better not to select complex drawings, they will cause an "overload" of the wall. The picture may be large in the center. A repeating pattern or a mirrored decor looks great.
Wall mural
Pasting with photo wallpaper will be the easiest and most beautiful option for decorating plastic. The material is glued to the panels, completely removing particles of dirt, dust, air bubbles. In order not to spoil the result, you can turn to professionals, although if you keep the room clean, you can achieve a good effect. Special transparent glue is applied directly to the drawing, then pressed against a plastic apron. After drying, you can attach the material to the wall.
Film
Attaching a self-adhesive film also serves as a good way to decorate an apron. The variety of colors of the film is huge, it is even possible to order printing on it according to an individual pattern. So in the kitchen you can even get vivid photos and incredible paintings. Next, you need to glue the film perfectly evenly, for which it is detached gradually, without completely tearing off the substrate immediately. The work requires care and patience. To slow down the setting speed of the material with an apron, the plastic is slightly moistened with water, which will allow you to adjust the position of the film. Air must be removed from under it, otherwise the result will be spoiled.
Apron Care Rules
The apron should be periodically washed with soap and water, using a soft sponge, cloth. Dishwashing liquid can be used instead of soap, but it can leave streaks if it is not washed off well enough. It is better not to use abrasives, and if there is hardened fat, try to soak it with soap. During operation, it is necessary to ensure that children do not scratch the material, and also to exclude its sharp overheating, although expensive panels are quite resistant to this kind of damage. It is not worth saving on the quality of the material, because it should serve you faithfully for a long time.
A plastic kitchen apron is a great alternative. A fairly budgetary and quick option for decorating the kitchen, while installation can be easily done by yourself. In addition, you do not have to live in the field for a long repair. All work is carried out with a minimum amount of dust and dirt. If necessary, the old panel is quickly replaced with a new one.
An apron in the kitchen is an indispensable design in terms of functionality that will help keep the walls from splashing while cooking or cooking. Wallpaper will quickly lose its original appearance, and installation can take a whole week. The most practical solution is to install an apron.
The most practical and inexpensive is plastic. Consumables for installing and fixing the panel are inexpensive, installation will take a short time. The apron is easy to care for. The only thing he fears is scratches. Therefore, when cleaning, it is not recommended to use abrasive substances and metal sponges.
The main parameters of plastic panels for the kitchen
To select the optimal size of the apron, it is important to determine the location and. The standard distance from the floor surface is up to 85 cm. It is desirable that the countertop covers the apron by at least 1 cm. Thus, the optimal distance from the surface to the lower border of the apron is 84 cm.
All other parameters depend on the arrangement of the kitchen. The ideal height of the wall panel for the kitchen is from 55 cm to 65 cm, depending on the installation of wall cabinets. The upper border of the apron should also be hidden behind hinged structures at a distance of at least 1 cm.
If it is not provided on the wall surface, and the cabinets are placed in one line, then the apron will be in the form of a rectangle with a width of 57-67 cm. The length of the panel depends on the size of the kitchen.
| Photo | Description |
 | For small aprons, it is not advisable to use photo printing, which will simply hide in a small area. |
 | The option with a calm design and an apron and the entire interior as a whole does not look interesting either. Everything merges. To revitalize the interior, you need to make one bright accent. |
 | Mirror and glossy surfaces always look advantageous in the interior, but you need to be prepared for frequent maintenance. Any drop will immediately catch your eye. |
Where to buy plastic kitchen panels, prices and photos of ready-made options
With a ready-made apron design plan, you should contact large hypermarkets specializing in construction products. They have the largest selection.
You can buy an inexpensive apron for a plastic kitchen at small retail outlets, their price may be lower than 250 rubles per 1 sq. m. As a bonus, they can offer delivery of an apron to the address.
The price of the product depends on the method of applying the pattern to the surface and the thickness of the panel. A quality product will cost more. You can apply an individual pattern, which will also slightly increase the cost of the apron. If the budget is limited, you should choose from ready-made samples in stores.
Calculator for calculating the required area of \u200b\u200bthe kitchen apron
One of the most popular and in demand today are kitchen aprons made of plastic. Such finishes are distinguished by the widest range. In stores you can find panels of various colors. Original copies with drawings and various patterns are also in great demand. Today we will take a closer look at how to properly attach plastic aprons so that they hold firmly and securely.
What are they?
The so-called apron is installed in the working area of \u200b\u200bthe kitchen. It is on this site that the cutting table, stove and sink are located. In most cases, aprons are installed along one of the walls of the room. Since food is being cooked in that area, the wall there may lose its presentable appearance due to splashes and grease stains. This is where an apron made of a more practical material comes to the rescue, which can be easily washed from any dirt.
Advantages and disadvantages
Plastic aprons are among the most popular, because they have a number of important advantages over other options for such finishes.
- Plastic aprons are inexpensive. This feature is especially important when it comes to the design of a large kitchen, where a fairly large apron is needed to cover a spacious working area. If desired, such material can be replaced with a new one without serious financial losses. Such a finish with the installation of tiles can cost a tidy sum, and installation work in this case will become much more complicated.
- When working with such material around the master will be relatively clean. There will be no dirt or clouds of construction dust. As a result, there will be almost no construction debris left.
- Installation of a plastic apron will not take much free time. Usually it takes no more than one day, especially if everything is done correctly according to the instructions.
- This finish looks attractive. Moreover, in stores you can find aprons made of plastic, made in a variety of colors and shades. Popular and copies with images. For example, it can be cute floral motifs, calming landscapes, animals or kitchen-themed drawings.
- A minimum of dirt and grease adheres to plastic aprons. If this happens, they can be easily washed without spending a lot of time and effort. To do this, you need to stock up on a regular damp sponge. Plastic bases can be washed using household chemicals. This will not affect the material in any way. Do not just turn to abrasive products - they can scratch the plastic.
- The plastic apron does not have a large number of joints in which dirt, grease and dust accumulate. The seams in such options are barely noticeable, and pollution does not clog in them.
- The weight of the plastic apron is very small, which makes it easier to work with it. Yes, and such a detail will not create serious loads on the wall.
- Plastic is not afraid of harsh operating conditions. This material cannot be damaged by high humidity or temperature changes. When exposed to aggressive sunlight, the plastic apron will not lose color saturation.
- A high-quality plastic apron will not emit a sharp chemical smell, indicating its toxicity.
- The installation of such materials is not difficult. Even an inexperienced home master can easily cope with such work.
- Plastic panels installed in an appropriate way can be easily replaced as soon as you get tired of them and want something new.
However, a plastic apron is not perfect. And such finishing materials have their own weaknesses, which must also be taken into account. Let's get acquainted with the disadvantages of such instances.
- If the plate is located too close to the plastic apron, it may become deformed. That is why professionals are advised to turn to such materials if the house does not have a gas, but an electric or induction stove.
- Plastic panels do not tolerate cleaning with abrasive products. Of course, they are more efficient, but such an apron cannot be cleaned with their help. Otherwise, the finish will simply quickly lose its presentation. It will be impossible to correct the situation - you will have to change the apron to a new one.
- In many cases, such a detail in the kitchen can only be installed if the wall surface is perfectly flat. Since in modern dwellings there are big problems with the evenness of the walls, it is necessary to prepare the grounds for the installation of plastic panels in advance. This can take a lot of time, effort and materials, especially if the walls have significant damage.
How to fix on the wall?
It is quite possible to install a kitchen apron with your own hands. Let's get acquainted with several ways to fix such a finish.
On guides
As mentioned above, a plastic kitchen apron is inexpensive. That is why such a finish is often replaced as soon as the old one gets bored. If you assume that over time you will want to turn to the installation of new plastic parts, then you should install them on the wall using guides, which are metal rails.
Guides must be attached to the walls using self-tapping screws. Plastic panels are simply fixed on these rails like rails. If necessary, they can be put forward and new elements put in.
self-tapping screws
If you want to install a plastic kitchen apron thoroughly and are not going to replace it in the near future, then you should turn to fixing it with self-tapping screws. Plastic can easily be drilled through. But keep in mind that for this method of installation, you will need to prepare the walls - they must be perfectly even, without potholes and drops. Do not be afraid of marks from self-tapping screws that appear on plastic decorative coatings. If desired, they can be easily and quickly closed using special color-coded plugs.
With this method of fastening, the plastic apron will not fit snugly against the wall base. There will be a small free space behind this part. Many craftsmen hide unattractive electrical wiring there, making the interior more aesthetic and neat. In addition, the apron, mounted on self-tapping screws, can also be easily removed as soon as you want.
On the crate
This is another popular way to install a plastic apron. It should be addressed only if the kitchen area is not too small. Many users prefer not to waste time by installing the apron directly on the rough base of the wall, but here you can encounter significant irregularities. In this case, the installation of the crate can save the situation.
The crate is a set of metal slats or wooden blocks that are attached to the wall base along the perimeter of the future kitchen apron. First, a kind of square is formed on the wall, which has the same dimensions as the plastic part. After that, vertical and horizontal strips are installed inside this square with the help of self-tapping screws. These details are needed to make the design stronger and more reliable. A plastic panel is also attached to the resulting crate with the help of self-tapping screws. At the same time, a small free space will remain between the apron and the wall, where it will be possible to place electrical wiring or build a beautiful backlight.
On glue
You can attach a plastic apron using a high-quality adhesive. This method of installation is rightfully recognized as the simplest and most understandable. Even a beginner can cope with its implementation.
In this case, for fixing, you can use a special high-quality glue or good liquid nails. Of course, it is better to turn to the second option. The glue will need to be applied to the prepared wall base in thin stripes, keeping a very small gap between them. After that, the selected plastic panel just needs to be pressed against the applied adhesive.
The main advantage of this installation method is its simplicity and speed of execution. However, we must take into account that sticking a plastic apron will work well only in a well-prepared basis. The wall should be perfectly flat and neat. It should not have traces of the old finish. Potholes, bumps, chips and cracks are also unacceptable.
The apron for the kitchen made of plastic is durable, durable, resistant to detergents, temperature changes, resistant to the development of fungi, mold. The materials are presented in different colors, textures, thicknesses, sizes, decorated with photo printing, painting, film. Plastic elements are attached to self-tapping screws, adhesive base, crate or guide panels.
Advantages and disadvantages of plastic aprons
The plastic apron is made from panels with different compositions and produced by different techniques, which differ in their own advantages. The list of main materials includes the following:
- PVC panels are produced up to 500 mm wide, up to 3000 mm long, 5-10 mm thick. When fastening, seams are created that are closed with sealants. When installing, it is important to make accurate measurements of the apron.
- The apron made of sheet plastic has a flat surface. The advantage of the variety of material is the ability to create a seamless coating.
- Apron made of polycarbonate has high strength. The composition of carbonate glass is similar to the characteristics of metal alloys. The carbonate coating does not break, resistant to mechanical damage, aesthetically pleasing, allows you to reproduce photo prints, images in 3D format.
Advantages of a plastic apron:
- affordable cost in comparison with other finishing materials;
- high resistance to increased importance;
- high temperature resistance;
- bacteria, mold do not appear on the surface of the plastic;
- ease of care;
- small mass;
- simple installation that you can do yourself;
- a wide palette of shades and textures;
- resistance to household chemicals, edible fats and acids;
- durability of operation.
Kitchen aprons made of plastic have the following disadvantages:
- instability to abrasive detergents;
- the inadmissibility of placing plastic near the gas hob, materials can only withstand electric and induction cookers;
- wear.
Rules for installing a PVC apron
The installation of a plastic apron in the kitchen is carried out after preparing the wall panels, which are cleaned of dust and dirt, leveled with a primer, putty and plastering. When gluing thick plastic, you can not perform complex repair work, because. material will hide deformations. After the completed repair, the parts of the apron are fixed using self-tapping screws to minimize damage to the kitchen unit.
Materials and tools
PVC apron can be attached using the following tools and building materials:
- metal profiles;
- screwdriver;
- wood bars;
- self-tapping screws;
- construction level;
- dowels for creating crates;
- ruler;
- special glue;
- yardstick;
- pencil or chalk;
- hammer.
Mounting methods
Plastic kitchen apron can be attached to the wall on:
- liquid Nails;
- self-tapping screws;
- crate;
- special profiles;
On rails special profiles
Fixing the apron on the guide profiles is a budgetary and practical method. The mounting technology allows you to change the panels if you need to change the design without lengthy installation work. Guides are metal rails that are mounted on the surface of the wall panel in a horizontal direction using self-tapping screws or building brackets. The cracks are covered with sealant.
self-tapping screws
When installing an apron at the stage of repair work when planning a design for a long period, it is recommended to use self-tapping screws. Plastic elements need to be drilled to create openings for fasteners. To implement this method, the surfaces of the wall panels should be leveled.
Traces of self-tapping screws on the facade are subsequently masked by plastic overlays in a single color scheme. The panels should not be tightly adjacent to the wall, so electrical wiring and other communication lines can be hidden under the facade. Mounting technology, if necessary, provides for dismantling and repair.
On the crate
You can fix the apron on the crate - wood beams, thin slats, PVC guides or a galvanized profile are used. The technology is optimal for hiding gas pipes and water supply structures under the facade of the electrical wiring network. A small distance is left between the wall panel and the headset. Wall surfaces must be treated with antiseptic compounds and antifungal impregnations. When using a wooden beam, it is necessary to lubricate the materials with a hydrophobic composition.
The bars for the crate, depending on the design of the project, are arranged horizontally or vertically. For sufficient structural strength, there must be at least 3 pieces. The pitch of the lamellas in a horizontal arrangement is 200-400 mm. The elements are fixed with dowels, which are installed in increments of 250 mm. The bars must be symmetrically located, so the building level is used in the work.
On glue
You can glue the apron with the help of special liquid nails. The wall should be flat, without deformations. The installation method is characterized by high speed, ease of execution, does not require the use of special equipment. If there is old wallpaper or putty on the walls, the materials are cleaned off. They also remove grease, dust and other contaminants. Then the surfaces are coated with a primer for rooms with high humidity, which has antifungal properties.
It is recommended to apply glue liberally to securely fix materials. It is required to install a balloon with glue in the gun and distribute the composition over the surfaces with zigzag strokes. The elements of the apron treated with glue are applied to the wall panel, pressed down, held for some time until the adhesive base dries.
For installation, it is recommended to choose sheets of standard sizes with a width of 600 mm, a length of 1000-3000 mm. The cutting of details is also carried out according to the author's design project.
Panel preparation, layout, cutting
Before fixing the facade, the elements are prepared: the parts are assembled, the panels are cut. Wide panels are placed horizontally to reduce the number of joints. Narrow canvases need to be cut and fixed at vertical seams. The material is cut with a knife, scissors or a hacksaw. Works can be ordered in professional workshops that perform laser cutting.
Final finishing
The finishing stage involves closing the space between the apron and the desktop with borders. The constructive solution will prevent the ingress of moisture, dust into the cracks; will correct defects in the work. The border can be flat, figured, triangular, rectangular, it gives additional decorative value to the facade of the headset. The elements are attached to the adhesive base. The finished look of the facade is given by the corner overlays.
Apron decoration
When planning a project, it is important to determine the design and decoration techniques of the backsplash in accordance with the color and style of the kitchen. For a small room, it is not recommended to use dark tones that visually reduce the room. It is recommended to purchase canvases of light shades or transparent panels with a printed pattern. The list of popular panel decorating techniques includes painting, photo wallpaper stickers, and films.
decorative painting
Effective decorative painting in the design of the apron. Acrylic paints, a sketch from the catalog or prepared according to the author's project are useful for work. Complex compositions are not recommended due to difficulties in execution and congestion in the design of the headset.
Before decorating, the coating is cleaned and degreased. Then the main tone is applied, a drawing is made on top. The paint should be applied in a thin layer. The image is placed in the center of the apron, or a repeating geometric or floral ornament is performed.
A universal basic tone can be a coating of the following colors:
- white;
- cream;
- grey;
- beige;
- olive;
- Ivory;
- metal;
- soft peach.
The painting is done with matte or glossy paints. The best solution for the kitchen is a small ornament that hides chips and scratches. Light colors allow you to visually enlarge the space; You can create accent areas using saturated tones.
Wall mural
A simple and effective method of decorating plastic facades is pasting with photo wallpaper. The material is applied to a dust-free surface. The adhesive base is smeared on the photo image from the reverse side, then the coating is pressed against the apron. After the elements have dried, the apron is fixed on the wall.
Wall murals are selected according to the style solution of the room and the texture in the decoration of the room.
Coatings can be:
- vinyl;
- non-woven;
- washable;
- acrylic;
- metal, etc.
Washable wallpapers are budget-friendly and easy to clean. Materials are dense, waterproof, smooth; presented in a wide range of shades. Cloths are attached to the leveled surfaces of the apron, because. do not hide deformations.
Non-woven materials are produced with a special protective moisture-resistant coating. They are resistant to direct sunlight, dust, and can be easily cleaned. Pigmentation is preserved during the operational time without damage.
Vinyl materials for photo wallpapers are durable, retain a rich tone, are easy to clean, resistant to moisture and household detergents. The sheets are dense, so they hide the unevenness of the walls. The materials are available in matte or glossy, textured or embossed. The textures of wood, stone, Provencal ornaments, original drawings are reproduced on the coatings.
Film
Self-adhesive film allows you to quickly decorate the facade of the kitchen. Manufacturers offer a wide palette of shades, the possibility of ordering photo printing with original prints of landscapes and paintings. The film is applied to a cleaned and even surface. To improve the quality of adhesion, the plastic is moistened with water and the location of the film is adjusted. It is required to remove the air under the coating.
When choosing a material, you need to consider the colors of the kitchen. Optimum saturated shades, contrasting combinations; for loft, provence, minimalism styles, light neutrals are used (brown, green, ocher, pale pink). For a country-style kitchen, the optimal films for wood texture, with imitation of brickwork, stone.
Apron Care Rules
When caring for an apron, the following rules must be observed:
- Regular cleaning with a damp sponge and household detergents is necessary.
- To remove water and detergents, after cleaning the surface is wiped with a dry cloth.
- It is not recommended to use compositions with abrasive particles and acid-base agents.
During operation and cleaning, the characteristics of the apron coatings are taken into account, which can be smooth or with a textured surface.
PVC apron panels are a budget option and serve to protect and decorate walls. Due to the high cost, skinals are less common - tempered plexiglass with decorative design. Since the panels are produced in different qualities, products made of ABS plastic are especially popular. A plastic apron can be purchased ready-made or made to order, and skinali installation does not require specialized repair skills.
Due to the soft structure characteristic of polymers, this material is flexible, which avoids deformation in operation. When installation is carried out, the sheet is equally successfully cut with a table knife and a jigsaw. ABS panels in stores are presented in two standard formats: 601x3001 and 601x2001 mm with a thickness of 1.6 mm.
Opaque ABS plastic and similar products are decorated with a special film or with the help of photo printing. Family photos and unique travel shots are brought to the surface, and an exclusive gallery adorns the perimeter of the kitchen. Compositions of flora and fauna, motifs on the theme of nature are considered a priority. First, a design is selected from the catalog from the photo, then the membrane is applied to the skins.
Advantages of plastic kitchen aprons
Advice! An apron made of transparent polycarbonate is indispensable for small spaces. For example, ABS skinali with a watercolor transparent pattern will visually expand the space. At the same time, under the skinali, you can install an LED strip as a backlight, it looks especially good if the panels are fixed on the frame.
Disadvantages of a plastic apron:
- Insufficient strength. After any dynamic load, a trace remains on the polymer surface;
- Within 3-5 years, the material will retain its original appearance, but then the panel will begin to fade. Light products turn yellow over time.
Important! The apron for the kitchen made of plastic is comparable in fragility to glass and requires careful handling. Polycarbonate products are characterized by a degree limit of +66 ° C, so the hob should not be installed close to the wall.
The principle of attaching a plastic apron with your own hands
Do-it-yourself installation of plastic skinali is carried out in several ways: on glue and crate. Traditionally, an apron for a plastic kitchen is installed according to the classical technology - on slats. With any method of fastening, the wall is first carefully leveled.
Technological nuances
It is permissible to attach the panel with self-tapping screws, as the hats will hide behind the cabinets of the headset. If you want to assemble an apron in the kitchen from small segments of plastic - 30 cm wide, the modules are made up according to the principle of wall panels. The first bar is inserted into the lower profile. The second is fitted into the groove and fixed with brackets. One end of the fastener clings to the frame, the other holds it. The following modules are installed identically. So that not a single joint is noticeable, each plate is adjusted to the previous one with a rubber mallet. The finishing module snaps into the groove. Setting the F-profile will permanently hide all the lines.
The disadvantage of this method is in the free space between the sheet and the wall, where mold can develop. Advantage - easy screen replacement in case of damage. If you want a polymer apron to serve for a long time and not lose its attractiveness, you can pay attention to more expensive analogues, for example, glass skinals.
You can glue an ABS plastic apron with liquid nails only on a perfectly flat wall. The glue is distributed in a dotted line over the surface where the polymer sheet is applied and pressed. From above, the sheet is supported by struts. At the corners and at the bottom, it is additionally fastened with self-tapping screws.
This installation method is simpler if the walls are even and no additional work is required to level them. The disadvantage is the inconvenience of dismantling and replacing.
A plastic apron is an opportunity to radically change the interior of your kitchen by adding bright colors to it. Many people in the reviews say that they installed a similar design in the kitchen with their own hands. You can choose different types of plastic that will fit into the design of any interior - imitating natural materials, with photo printing, plain. You can also place your photos on the apron, which will make the kitchen space unique.
Plastic aprons for the kitchen and their types
An apron is a canvas that covers part of the wall in the kitchen. The coating is placed in the "working area" and serves to protect the wall from the effects of temperatures, the accumulation of dirt, and also acts as an independent piece of furniture. The apron is mounted near the stove, sink, and also above the countertop.
Usually, aprons made of dense materials such as ceramic tiles, marble, wood paneling or fire-resistant glass are mounted in the work area. Aprons made of plastic have recently become popular, which is much cheaper than other materials and at the same time reliably protects the wall surface.
The following types of plastic aprons are offered for installation:
- ABS sheets. Such material is sold in the form of plates, from which the desired shape can be cut. Usually ABS sheets are used if photo printing is planned. You can choose plastic with an image already applied or order an individual drawing, for example, place a high-quality photo or a beautiful picture on the canvas.
- PVC panels. Sold with a pattern already applied, usually decorated with ornaments or plain. Quite popular is plastic, which imitates various surfaces - marble, wood, mosaic. They vary in panel thickness.
- PVC lining. On the market you can find several types of such material, which differ in thickness. Usually produced in monophonic in soothing pastel colors.
The choice of material should be based on its technical characteristics, as well as the personal preferences of the customer.
Advice. The thicker the plastic chosen for mounting the apron, the higher its strength and resistance to temperature.
It is worth noting that different types of plastic differ significantly in price. For example, PVC lining is much cheaper than other types, and the most expensive types are ABS sheets. You will also have to pay extra for applying a personal drawing to the apron.
The main pros and cons of a plastic apron
Plastic aprons are installed in almost all modern kitchens. Such popularity of the material is due to its positive qualities:
- plastic is much cheaper than other materials that are used to install aprons;
- easy to clean - it is enough to regularly wipe the apron with a soft sponge;
- not afraid of moisture, steam, and also withstands high temperatures (up to 80 degrees);
- does not require preparation of the wall surface before installation;
- easy to install - you can install it yourself;
- It has many colors, which allows you to create a unique kitchen design;
- the pattern on the plastic does not fade or fade even with prolonged use;
- durable in use with proper operation;
- the apron is easy to dismantle if necessary.
With all the advantages of a plastic apron, it has a number of disadvantages.
- The main disadvantage of plastic in the interior of the kitchen is the combustibility of the material. Placing the apron in close proximity to open flames may result in a fire. In this case, the plastic ignites in a few seconds and completely melts in 5 minutes. When burned, it forms toxic substances that are deadly to humans. Therefore, owners of gas stoves should place the apron at least 20 cm from the fire. It is also recommended to separate the stove from the wall with a metal cover.
- There are many low-quality plastic models on the market, which usually cost much less, but at the same time have low technical characteristics. Such material emits toxic gas when heated. In order not to buy a fake, be sure to ask the seller for a quality certificate.
- The plastic apron does not suffer blows. When large objects hit the surface, small cracks and dents form on the plastic, and the pattern is damaged.
- The material is subject to deformation due to the action of abrasive substances, as well as detergents, which contain acetone. Do not try to clean the surface with metal sponges, as cracks and scratches may form.
Of course, a plastic apron has more positive qualities than negative ones. If you properly care for the surface, as well as take the choice of material seriously, the apron will bring only positive emotions to the owners of the apartment.
Do-it-yourself plastic apron installation
You can install an apron in the kitchen with your own hands or turn to professionals for help. For installation, you will need a minimum set of tools and consumables.
The first thing to do is to choose the type of plastic and its color. Having picked up the material for the design of your kitchen, you can begin to take measurements.
Advice. In order to correctly measure the area of \u200b\u200bthe canvas, it is necessary to carry out measurements with a margin. Part of the apron, about 20 cm, should protrude beyond the wall cabinets and countertop. In this way, maximum wall protection can be achieved.
After choosing and acquiring plastic, you can proceed with its installation. Before starting work, the surface of the wall should be treated with a primer and allowed to dry a little. It is not necessary to level the wall before work. Installation is carried out in several ways:
- planting an apron on waterproof glue;
- fastening the canvas with self-tapping screws;
- installation of plastic on a pre-prepared structure.
The first method is the easiest - strips of glue are applied to the wall. First, the glue is applied around the perimeter, and then in horizontal stripes with an interval of 15 cm. Then pre-fat-free plastic is applied to the wall. This installation method is the fastest, but has a drawback - it will not work to remove the plastic sheet without deformation.
Attaching the apron with self-tapping screws is also not difficult. For reliable fastening, four self-tapping screws are enough, which are located along the perimeter of the canvas.
If the kitchen wall is uneven, a plastic apron can be attached to an aluminum profile. At the same time, aluminum or wooden slats are first attached to the wall, and then an apron is mounted on them.
After the installation is completed, holes are cut out on the apron for sockets, wires and pipes.
Thus, a plastic apron is an economical and easy way to decorate your kitchen.
Installation of a plastic kitchen apron: video
Plastic apron: photo
The classic solution is a tile backsplash, but not everyone finds the design to their liking. Plus, styling is hard work.
Much easier with aprons made of MDF, wood and even metal. But all these materials lose in terms of cheapness and ease of installation to plastic.
1. Types of plastic
PVC plastic is highly rigid and durable, it can be painted and varnished, and it is also very resistant to fire. The price is relatively low. In addition, its installation is quite possible to do it yourself.
Aprons made of polycarbonate are the most durable and resistant to damage of various kinds, but they are also the most expensive type of plastic. As a rule, people come for such an apron purposefully, it is not as popular as PVC. But it is impossible for an unprepared buyer to visually distinguish between these two plastics.
2. Advantages and disadvantages
Advantages of plastic:
- It is resistant to moisture
- holes necessary for sockets are easily cut out in it,
- installation on the wall does not take much time.
- Pick a style and color will not be difficult even for the most sophisticated cuisine. Polycarbonate, in addition to the above advantages, is characterized by resistance to high temperatures and even aggressive home "chemistry".
Feedback from Xenia Vorontsova: I have a plastic apron in my kitchen. Basically it suits me. It is easy to take care of it, you can clean it with the usual means. The only negative is that it is not as beautiful as glass with a pattern.
The disadvantages include some difficulty in care:
- streaks form on the surface from water
- PVC scratches quite easily and scratches will be noticeable
- PVC can deform from high temperatures.
Feedback from Igor Shkurny: I had plastic ... I put it on temporarily because of nothing to do .. to be honest - rare shit. Firstly, all these corners, and secondly, the fragility of plastic. Now there is a tabletop instead of a panel (I got it on the ball). I like it, it is durable and practical, but in general it is done either as a TILE or a wall panel.
3. Installation
Installation does not require any special skills, but the presence of some tools - yes. The choice of installation method depends on the curvature of the wall:
- If the wall is absolutely flat, the apron can be attached with glue. However, the glue will leave marks on the wall and on the plastic itself, it will not work to remove and hang the panel again. When choosing this installation method, special attention should be paid to surface preparation. After removing the old coating, all cracks and crevices must be repaired, and the wall primed.
Tools and materials: mounting glue, building level and tape measure.
- An easier way to install is with self-tapping screws. Before installation, the surface must be leveled, however, the same care as when installing with glue is not required. Then - you can start the installation. After completion of the work, the caps of the self-tapping screws must be closed with decorative caps, and the edges of the apron should be covered with skirting boards or other elements.
Tools and materials: hammer drill or impact drill, screwdriver or screwdriver, self-tapping screws, decorative plugs and skirting boards, as well as a building level and tape measure.
- Self-tapping screws on the crate - in this case, the wall can not be specially prepared at all. It is enough to make a crate and install an apron on it. Further actions are similar to the second method.
Tools and materials: hammer or impact drill, screwdriver or screwdriver, material and equipment for creating crates, decorative caps and baseboards, as well as a building level and tape measure.
4. Photos and prices
Unfortunately, all our attempts to find real photos of plastic aprons with prices ended in vain. Manufacturers and sellers strongly prefer to post photos of samples on the Internet, rather than finished work. And, as a rule, these samples involve photo printing.
The cost of 1 p.m. 60 cm wide (standard size) $20 to $50.
Apron made of PVC plastic with photo printing 2x0.6 m in size for about $ 50
An apron for a kitchen set is a useful and even necessary interior detail. It can be not only ceramic, but also plastic - let's take a closer look at this option.
A sink for washing dishes, a cutting table, a gas or electric stove - most often these kitchen elements in our apartments are located along one wall. In the process of cooking, splashes of water, steam and fat inevitably fly from the sink and stove, and the process of cutting food leaves noticeable traces. Therefore, the wall adjacent to the sink, stove and table can quickly lose its presentable appearance.
For this reason, it is customary to design the working space of the kitchen with the so-called apron. This element is a large "overlay", which should protect the surface of the wall. The apron is always made of a material that is resistant to moisture and easily washed from dirt.
Undoubtedly, a ceramic tile apron remains a classic option. However, it is distinguished by the highest cost - and in the process of repair I really want to save money. A good alternative can be a panel made of high-quality plastic - durable, beautiful and inexpensive.
A plastic apron is made from polymeric materials - polycarbonate or polyvinyl chloride. Plastic models are distinguished by a wide variety of textures and patterns, they can be both glossy and matte. According to their characteristics, they are not inferior to ceramics - and in some parameters even surpass it.
Advantages of a plastic apron
What are the advantages of a plastic backsplash for a kitchen wall?
- First of all, this option is extremely low cost. The issue of price becomes especially important when it comes to a spacious kitchen, where it is necessary to cover a significant section of the wall with an apron. In order to tile it, it would take a lot of money - but plastic allows you to spend a minimum of money.
- Models made of plastic have an attractive appearance. Due to the variety of design options, you can choose an element that fits perfectly into the interior of the kitchen - and will look solid and aesthetically pleasing. It is a mistake to think that plastic looks cheap - modern technologies allow you to create very beautiful and sophisticated products.
- The apron collects a minimum of dirt and is easy to wash. Drips and stains from water, droplets of fat, sediment from evaporation - all this is quickly removed from the plastic surface with an ordinary damp sponge. Plastic can be washed using household chemicals - the material will not suffer, most importantly, do not use abrasive powder products.
- The seams between the component parts of the panel are very small, almost invisible. Therefore, even after long-term use, dirt does not clog in them.
- Plastic is well tolerated by difficult operating conditions. It calmly reacts to high humidity, does not deform from temperature changes, does not fade from sunlight.
- The plastic panel is easy to install. For accurate fixing of ceramic tiles, it is necessary to have the skills of repair work - in addition, the tile dries for a long time. Plastic is assembled by hand in a couple of hours - you can use the kitchen immediately, without a long wait.
The disadvantages of such models include only the sensitivity of the material to abrasive influences - however, almost all materials have a similar disadvantage. In order for the plastic to retain its presentable appearance for a long time, it is enough just not to scratch it and not to use powders when cleaning.
How to fix an apron on the wall?
How exactly is a plastic apron fixed on the kitchen wall? There are four main ways - all of them are convenient and quite simple. Let's take a closer look at each of them.
On special profile guides
As already said, plastic apron - a very inexpensive purchase. Therefore, many people prefer to experiment with design, replacing the panel with a new one from time to time. If you suspect that in a couple of years you will want to refresh the interior, then it is most reasonable to mount the cladding on the profile guides - so you can freely remove the coating without damaging the wall.
The guides are special metal rails that are fixed horizontally on the wall surface with self-tapping screws. The plastic sheet is simply installed on the guides, as if on a kind of “rails” - and, if necessary, is pulled out and replaced with a new one.
Self-tapping to the wall
If you choose kitchen cladding for years to come and are not going to change it without good reason, then you can immediately use self-tapping screws - plastic is easily drilled through. This installation method requires the most even rough surface - but it will be very convenient if an expensive decorative coating is hidden behind the apron, which you don’t want to spoil with metal slats and even more so with glue. Traces of self-tapping screws on the plastic surface are easy to disguise - simply by placing plugs to match the color.
By the way, with this method of installation, the plastic panel does not fit close to the wall - there is a small space behind it. If desired, electrical wiring can be hidden under the apron. In addition, the self-tapping apron is also easily removed.
On the crate
If the kitchen is quite spacious, and a wide section of the wall is required to be covered with an apron, many people prefer to save effort - and install the cladding directly on the draft wall without decorative trim. In such cases, the wall is not always perfectly flat - however, this is easy to fix with the help of the crate.
The crate is a few metal slats or wooden bars attached to the wall around the perimeter of the future apron. First, a kind of square is created on the wall, matching the size of the apron. Then additional horizontal and vertical strips are fixed inside it with self-tapping screws, giving the structure greater stability and strength. A plastic panel is attached to the resulting crate - also with self-tapping screws. Between the apron and the wall there is some space where you can lay electrical wiring or, for example, make a backlight.
On glue
And finally, the easiest way to install the cladding is to put it on the glue. It is best to use liquid nails. The glue is applied in thin strips at a short distance from each other, and then the plastic panel is pressed on top.
The main advantage of the method is the speed and ease of installation. But it must be borne in mind that the plastic panel can only be glued to a perfectly flat wall. If the surface has even slight differences in height, the apron will not fix well and can quickly fall off.
plastic apron cost
How much does a plastic apron cost? The exact price always depends on the material, decorative design of the apron. For example, polycarbonate is cheaper than polyvinyl chloride, a panel with a uniform texture will be cheaper than a panel made to look like marble or wood.
On average, the cost of a plastic apron is about 1,500 rubles. When choosing a panel, it is not recommended to consider too cheap models - they may turn out to be of less quality and durable.
External variety of plastic aprons
What design possibilities does a plastic apron provide when installed in a kitchen? The appearance of the panels is very diverse. The simplest variety can be called ordinary plain aprons or PVC panels that imitate lining. But if you want to create a truly unusual design in the kitchen, then you should pay attention to aprons with a pattern or artistic texture.
- A plastic apron for tiles, mosaics, natural stone or wood is very popular. Such a surface quite convincingly imitates granite and marble, wood species, colored glass, brick.
- An interesting variety can be called models with a color pattern. The image is applied in two ways - it can be embossed on the plastic itself or on the film, which is a decorative layer of the plastic panel. The options for drawings are truly endless - it can be flowers, natural or urban landscapes, still lifes and much more.
- The plastic apron can have a glossy or matte finish. Which one to choose depends on personal preference. However, keep in mind that you will have to take care of the shiny surface more carefully - dried water splashes and droplets of fat will be especially noticeable on it.
In general, a plastic apron fits perfectly into any interior and in appearance practically does not differ from more expensive materials. If you are looking to save on home repairs, this design option can be a real find for you.
Tell
Plastic aprons for the kitchen are gaining more and more popularity. The reason for this is the value for money. For example, an apron for a kitchen made of plastic with photo printing will cost several times cheaper than a similar tempered glass apron (). The ease of installation also plays a role, because you can install such an apron yourself, avoiding additional costs.
Plastic, or plastic, is a synthetic material made from polymers. Polymers are obtained synthetically, and at the same time they set the desired properties, obtaining plastics for various purposes. Plastic kitchen aprons are mainly made from several types of plastics, which differ both in properties and in price.
Types of plastic for aprons in the kitchen
ABS
ABS plastic is produced in the form of granules, transparent or having a color. They are molded into flat sheets of size 3000x600x1.5 mm or 2000x600x1.5 mm. It is a very impact and bending resistant material. If the temperature rises to 100 degrees for a short time, it will not catch fire, and 80 degrees can withstand a long time, so ABS kitchen aprons are fireproof. A metallic coating can be applied to this plastic - then it will look like a mirror, but the weight and installation of products from it is much easier than from mirror glass.
The main advantages of the material:
- Resistant to aggressive liquids and environments;
- Does not deteriorate when interacting with fats, oils, hydrocarbons;
- It can have both a matte and a shiny surface;
- A wide variety of colors;
- Not toxic;
- It can be operated at temperatures from -40 to +90.
Cons of a kitchen apron made of ABS plastic:
- Fast fading in sunlight;
- When acetone or solvents containing it get on the surface, the plastic dissolves and loses its appearance;
- The material has a yellow tint.
Acrylic glass (polycarbonate)
It is produced in the form of sheets with dimensions of 3000x600x1.5 mm and 2000x600x1.5 mm. In many respects, this material is superior to glass - it is more transparent, withstands even strong impacts, while it has a small specific gravity, it is easier to mount it on the wall in the kitchen than glass.
Advantages of a polycarbonate kitchen apron:
- High transparency;
- Impact and bending strength;
- fire resistance;
- Does not fade or fade in the sun;
- Fire safety: does not burn, but melts and solidifies in the form of threads, does not form toxic substances during combustion;
- Does not emit hazardous substances into the air even when heated;
- It has an attractive appearance, practically indistinguishable from glass.
The only negative is the rather high price of the product compared to other types of plastic aprons, but it is still much cheaper for the kitchen, although it surpasses it in some respects.
PVC
Polyvinyl chloride has long been widely used in finishing work, and not only in the kitchen. Most often, kitchen panels for aprons made of plastic are made from it. This is a fairly budget option, which has its pros and cons.
Finishing material is produced in several types:
- Panels: up to 3000 x (150 - 500) mm;
- Lining: up to 3000 x (100 - 125) mm;
- Sheets: (800 - 2030) x (1500 - 4050) x (1 - 30) mm.
PVC is the most budget option, and also the most “high-speed” - installation does not require preliminary surface preparation, it can be done on its own.
Advantages of using PVC for the production of plastic apron:
- Ease of installation and maintenance;
- Resistance to high temperatures and humidity;
- A variety of design solutions: plastic can have any color, voluminous details, prints or be transparent.
Cons of a PVC kitchen apron:
- Low abrasion resistance;
- Rapid loss of strength;
- Rapid loss of appearance under the influence of light and detergents;
- Water can get into the gaps between the panels, as a result, suitable conditions are formed for the formation of fungus and mold;
- Low fire safety: does not withstand contact with fire;
- May release hazardous substances into the air.
Not all panels have the last drawback, so when buying, you should require a quality certificate and make sure that the chosen option is safe.
Plastic provides the widest possibilities for design, since products made from it can have almost any color, interesting texture, embossed surface, pattern or photograph applied using photo printing. The only problem is to choose the right option for your interior.
Color
Plastic can have any color and shade - from pastel, light colors to thick, saturated colors. Colors are selected, focusing on the chosen style of interior and the size of the kitchen. Light colors will help to make the kitchen visually larger, dark ones “compress” the room.
The kitchen apron area is the most “dirty” place in the kitchen, so a pure white or black color is hardly appropriate here. On soothing pastel colors, water drops and other dirt are not so noticeable, the panels do not have to be wiped several times a day.
Drawing
Almost any pattern can be applied to plastic - its choice depends only on your imagination and design requirements. Small patterns will help make accidental dirt less noticeable, they are suitable for small kitchens. In a large room, you can use large patterns and drawings.
Imitation of natural materials
Plastic panels imitating natural finishing materials are very popular. They save not only money, but also time during repairs. Laying brickwork or porcelain stoneware tiles is expensive and time-consuming, installation of a “brick-like” or “porcelain-like” panel can be done on your own and takes only a few hours.
Plastic can imitate ceramic tiles with or without a pattern, the popular boar tile in different colors, wood or stone surfaces. Imitation of materials is applied to plastic using photo printing.
Photographic images of various subjects on kitchen aprons are gaining popularity. They make it possible to make the kitchen more interesting, give it exclusivity, photographs remind of favorite places, summer vacations, transfer to a garden with exotic flowers or add delicious fruits to the kitchen decor.
Kitchen aprons made of plastic with photo printing cost much less than those made of glass. The cost of installation is also lower, and, in addition, it remains possible to change something in the kitchen. In a glass apron, after its installation, it is no longer possible to make a hole to hang, for example, a railing that is necessary, or a shelf for spices. Plastic allows it. Moreover, at a glance, the glass skinal is practically indistinguishable from a kitchen apron made of plastic with photo printing.
Loading...
